Home
Marchi

Nessuna marca

Fornitori
Migliori vendite
Flanged ballrace 6 x 10 x 3 mm Anteprima

Riferimento: 92/91

Flanged ballrace 6 x 10 x 3 mm

Recensioni: 0

Ballraces are used wherever moving parts are required to run with a minimum of play and a minimum of friction. The more ballraces are used, the more smoothly the mechanics of a helicopter works, and the lower the rate of wear. The dimensions of a ballrace mean: inside diameter (I.D.) x outside diameter (O.D.) x thickness. For flanged bearings the same...

Prezzo 14,70 €
Più
In vendita su richiesta
Tutte le migliori vendite

Heat shrink sleeve set

10/2
Valutazione 

Heat-shrink sleeving is a highly versatile material, and is useful for aerial joints, wire tailskids, and as security for transmitter strap clips.

Heat shrink sleeve set
2 mm, 3.1 mm and 5.5 mm Ø, two of each, 25 cm long

Tip For absolute water and dust proof protection of patch cables use a larger heat shrink sleeve over the patch cable and fill both ends with a small quantity of heated adhesive.

6,60 €
Tasse incluse
Quantità
In vendita su richiesta

 

Política de seguridad

 

Política de envío

 

Política de devolución

Descrizione

Heat-shrink sleeving is a highly versatile material, and is useful for aerial joints, wire tailskids, and as security for transmitter strap clips.

Heat shrink sleeve set
2 mm, 3.1 mm and 5.5 mm Ø, two of each, 25 cm long

Tip For absolute water and dust proof protection of patch cables use a larger heat shrink sleeve over the patch cable and fill both ends with a small quantity of heated adhesive.

Dettagli del prodotto
10/2
Recensioni

Ancora nessuna recensione da parte degli utenti.

Scrivi la tua recensione

Heat shrink sleeve set

Heat shrink sleeve set

Heat-shrink sleeving is a highly versatile material, and is useful for aerial joints, wire tailskids, and as security for transmitter strap clips.

Heat shrink sleeve set
2 mm, 3.1 mm and 5.5 mm Ø, two of each, 25 cm long

Tip For absolute water and dust proof protection of patch cables use a larger heat shrink sleeve over the patch cable and fill both ends with a small quantity of heated adhesive.

Scrivi la tua recensione
6 autres produits dans la même catégorie :
Allen key set, 7-part Aperçu rapide

Référence: 11/0

Allen key set, 7-part

Commentaire(s): 0

Allen key set, extra-length, with ball-end. Contains all sizes for mechanics, including imperial Allen key for damaged grubscrews.

Prix 26,60 €
Détails
En vente sur demande
Pin, for applying thread lock Aperçu rapide

Référence: 11/41

Pin, for applying thread lock

Commentaire(s): 0

A Loctite pin is an essential tool for every workshop. Using the pin it is easy to apply the quantity of fluid you need in small threaded holes. The pin is chrome-plated so that the fluid can easily be wiped off again.

Prix 6,20 €
Détails
En vente sur demande
Lubricant set Aperçu rapide

Référence: 10/367

Lubricant set

Commentaire(s): 0

All mechanics require the correct lubrication: not too much and not too little. If friction is low, the rate of wear is reduced. This lubricant set includes both lubricants required for complete protection of the mechanics. When re-greasing check carefully that no grit is allowed into the lubricant (abrasive effect), and clean all parts before...

Prix 19,90 €
Détails
En vente sur demande
Fine-point screwdriver set Aperçu rapide

Référence: 11/39

Fine-point screwdriver set

Commentaire(s): 0

The fine point screwdriver set contains 6 selected socket spanners for 12 different applications: for M 3 and M 4 grubscrews, M 3 and M 4 socket-head cap screws (with ball-shaped head each), and for large and small slot-head scews; all together with a ball-link driver (4 mm connection), a handy grip and a tool bag. Insert the required socket spanner to...

Prix 94,20 €
Détails
En vente sur demande

Seguici su Facebook

Facebook