Spiral tooth bevel gears 17 t. Ø 5 mm + 16 t. Ø 5 mm

Référence: 97/10

Palonnier AC

Bellcrank, left-hand

Référence: 103/7

Porte-pales

Not available

Référence: 97/5

Ressort de rappel AC

The linkage of the tail rotor is affected by the face clearance of servo gears, by the bellcrank and by the pushrod. Minimal play can arise from the face clearance of the servo gears as well as from the necessary freedom of movement for the ball at the bellcrank.With the screw fitting pushrod connector the pushrod still is adjusted without play. The face...

Référence: 97/20

Kit palonnier AC

Bellcrank set, with flanged bearings, bush and shim washer

Référence: 98/15

Douille de commande AC

 Control sleevefor tail rotor shaft 5 mm ∅with nut (left-hand thread!)

Référence: 92/82

Heckrotor-Ergänzungsset 4-Blatt

Référence: 97/15

Bellcrank aluminum left

Not available

Référence: 92/11

Kit visserie, 12 pièces

 Screw set, 12-part1 x socket-head cap screw M 2 x 8 (90015)5 x socket-head cap screw M 2 x 10 (90020)6 x self-locking nut M 2 (90525)

Référence: 103/10

Porte-pales AC

Tail blade holder for hub with 5 mm.

Référence: 92/10

Boîtier AC

The advantage of this 2-part tail rotor housing is that the gearbox can be checked just by removing the rear housing shell. When adjusting the meshing clearance of the bevel gears and similar settings please keep closely to the building instructions; for lubrication use titanium grease; Ord.No. 10/36.The tail rotor is a vital and highly stressed component...

Référence: 92/80

Kit complément anticouple

Scale tail rotor fittings set, complete as illustrated

Référence: 95/20

Pignon-Kit augmentation régime rotor anticouple

Bevel gear set, speed up gearing for the tail rotor of the Hughes 500, Ord.No. 9040, complete as illustrated.

Référence: 100/12

Raccords articulés

 Ball linkspack of 2shortconnection with ball-end bolts

Référence: 94/15

Axe AC 5 x 84,5 mm

 Tail rotor shaft5 x 82 mm

Référence: 99/9

Bague de commande AC

 Control ringfor tail rotor shaft 5 mm ∅

Référence: 94/19

Heckrotorwelle 6 x 112 mm