Accueil
Marques

No brand

Fournisseurs
Meilleures Ventes
Flanged ballrace 6 x 10 x 3 mm Aperçu rapide

Référence: 92/91

Flanged ballrace 6 x 10 x 3 mm

Commentaire(s): 0

Ballraces are used wherever moving parts are required to run with a minimum of play and a minimum of friction. The more ballraces are used, the more smoothly the mechanics of a helicopter works, and the lower the rate of wear. The dimensions of a ballrace mean: inside diameter (I.D.) x outside diameter (O.D.) x thickness. For flanged bearings the same...

Prix 14,70 €
Détails
En vente sur demande
Toutes les meilleures ventes

Ressort de rappel AC

97/5
Note 



The linkage of the tail rotor is affected by the face clearance of servo gears, by the bellcrank and by the pushrod. Minimal play can arise from the face clearance of the servo gears as well as from the necessary freedom of movement for the ball at the bellcrank.
With the screw fitting pushrod connector the pushrod still is adjusted without play. The face clearance of the servo and the ball movement on the bellcrank can not and may not suppressed direct.
Remaining play is balanced by the return spring, if it is installed between tail rotor hub and control bridge. The spring force is dimensioned so that the force of the servo exceeds it, but the control bridge is held play free at the same time.
Return spring, chromed, pack of 2, for 5 mm ∅ tail rotor shaft

11,20 €
TTC
Quantité
En vente sur demande

 

Política de seguridad

 

Política de envío

 

Política de devolución

Description



The linkage of the tail rotor is affected by the face clearance of servo gears, by the bellcrank and by the pushrod. Minimal play can arise from the face clearance of the servo gears as well as from the necessary freedom of movement for the ball at the bellcrank.
With the screw fitting pushrod connector the pushrod still is adjusted without play. The face clearance of the servo and the ball movement on the bellcrank can not and may not suppressed direct.
Remaining play is balanced by the return spring, if it is installed between tail rotor hub and control bridge. The spring force is dimensioned so that the force of the servo exceeds it, but the control bridge is held play free at the same time.
Return spring, chromed, pack of 2, for 5 mm ∅ tail rotor shaft

Détails du produit
97/5
Avis

Aucun avis n'a été publié pour le moment.

Donnez votre avis

Ressort de rappel AC

Ressort de rappel AC



The linkage of the tail rotor is affected by the face clearance of servo gears, by the bellcrank and by the pushrod. Minimal play can arise from the face clearance of the servo gears as well as from the necessary freedom of movement for the ball at the bellcrank.
With the screw fitting pushrod connector the pushrod still is adjusted without play. The face clearance of the servo and the ball movement on the bellcrank can not and may not suppressed direct.
Remaining play is balanced by the return spring, if it is installed between tail rotor hub and control bridge. The spring force is dimensioned so that the force of the servo exceeds it, but the control bridge is held play free at the same time.
Return spring, chromed, pack of 2, for 5 mm ∅ tail rotor shaft

Donnez votre avis
16 andere Artikel in der gleichen Kategorie:
Spiral tooth bevel gears 17... Vorschau

Artikel-Nr.: 95/11

Spiral tooth bevel gears 17 t. Ø 5 mm + 16 t. Ø 6 mm

Bewertungen: 0

Zahnradkombination 17 Z./16 Z., dadurch ständig wechselnder Zahneingriff / erhöhte Lebensdauerum 6 % erhöhte Drehzahl der Heckrotorwellebessere Laufruhe und erheblich verminderter Geräuschpegel, besonders interessant für Elektrofluggrößerer ZahnflankeneingriffAbmessungen analog zu Ord.No. 95/5 & 95/6für alle Vario Alu Heckrotorgetriebe ( ø 6 mm Welle)

Preis 143,90 €
Mehr
Verkauf auf Anfrage
Spiral tooth bevel gears 17... Vorschau

Artikel-Nr.: 95/10

Spiral tooth bevel gears 17 t. Ø 5 mm + 16 t. Ø 5 mm

Bewertungen: 0

Zahnradkombination 17 Z./16 Z., dadurch ständig wechselnder Zahneingriff / erhöhte Lebensdauer um 6 % erhöhte Drehzahl der Heckrotorwelle bessere Laufruhe und erheblich verminderter Geräuschpegel, besonders interessant für Elektroflug größerer Zahnflankeneingriff Abmessungen analog zu Ord.No. 95/5 für alle Vario Alu Heckrotorgetriebe (ø 5 mm Welle)

Preis 143,90 €
Mehr
Verkauf auf Anfrage
Heckrotor-Ergänzungsset... Vorschau

Artikel-Nr.: 92/82

Heckrotor-Ergänzungsset 4-Blatt

Bewertungen: 0

Conversion set from a 2 to 4 blade tail rotor for 2 blade tail rotos with a 6 mm shaft Application example: AirCrane Ord.No. 6400

Preis 299,50 €
Mehr
Verkauf auf Anfrage

Suivez-nous sur Facebook

Facebook