Exhaust system for Air-Crane

Reference: 434/16

Exhaust tube for turbine, AIRWOLF, Bell 230 und Bell 430

On the AIRWOLF, Bell 230 and Bell 430 the forward thrust is eliminated by the scale division of the exhaust tube (enlarging of the cross-section) and exhausting up through the rotor disc.

Reference: 144/16

Exhaust for EC 145 Turbine

stainless steelfor turbine 

Reference: 770/16

Exhaust tube for turbine, BK 117

On the BK 117 the forward thrust is eliminated by the scale division of the exhaust tube (enlarging of the cross-section) and exhausting up through the rotor disc.

Reference: 350/16

Exhaust system for Alouette III

Not available

Reference: 340/16

Exhaust for Lama

This exhaust system is designed for the Lama with turbine power system.

Reference: 214/16

Exhaust for Bell 212 Twin Jet

Exhaust tubes for turbines are always designed for the specified model. It is important that no forward thrust emerges from the system. Should this still occur, the forward thrust produced is minimal.Turbine exhaust tubes are designed as exhaust-gas diffusers, i.e. opens wider towards the rear.

Reference: 791/16

Exhaust tube for turbine, Cobra

Exhaust tubes for turbines are always designed for the specified model. It is important that no forward thrust emerges from the system. Should this still occur, the forward thrust produced is minimal.Turbine exhaust tubes are designed as exhaust-gas diffusers, i.e. opens wider towards the rear.

Reference: 268/16

Exhaust for XL-C

Exhaust tubes for turbines are always designed for the specified model. It is important that no forward thrust emerges from the system. Should this still occur, the forward thrust produced is minimal.Turbine exhaust tubes are designed as exhaust-gas diffusers, i.e. opens wider towards the rear.

Reference: 904/16

Exhaust tube for turbine, Hughes

The shape and dimensions of the Hughes fuselages allow for the installation of a three outlet exhaust. The outlets on the left and right hand sides offer the necessary cross-section and greatly reduce the forward thrust. This keeps the scale rear outlet while only discharging a small amount of the total exhaust gas.

Reference: 302/16

Exhaust, stainless steel

Exhaust system for Alouette II

Reference: 9/26

Ceramic band 50x3x1000 mm

Not available

Reference: 429/16

Exhaust Bell 429

Stainless steel exhaust manufactured specifically for the Bell 429

Reference: 342/16

Exhaust for Gazelle

Not available

Reference: 530/17

Tapa de escape Ø 55 mm

Reference: 930/16

Exhaust gas efflux for Mil Mi-2

right / leftThis exhaust system is designed for the Mil Mi-2 with turbine power system.

Reference: 900/16

Exhaust, stainless steel

Exhaust, stainless steel, for Ecureuil