Home
Marchi

Nessuna marca

Fornitori
Migliori vendite
Flanged ballrace 6 x 10 x 3 mm Anteprima

Riferimento: 92/91

Flanged ballrace 6 x 10 x 3 mm

Recensioni: 0

Ballraces are used wherever moving parts are required to run with a minimum of play and a minimum of friction. The more ballraces are used, the more smoothly the mechanics of a helicopter works, and the lower the rate of wear. The dimensions of a ballrace mean: inside diameter (I.D.) x outside diameter (O.D.) x thickness. For flanged bearings the same...

Prezzo 14,70 €
Più
In vendita su richiesta
Aste 3,0 x 75 mm Anteprima

Riferimento: 70/76

Aste 3,0 x 75 mm

Recensioni: 0

Ready-made pushrod, threaded M 3. Content of the package: 1 piece

Prezzo 6,30 €
Più
In vendita su richiesta
Tutte le migliori vendite

Coperchio scarico Ø 90 mm

350/17
Valutazione 

When the turbine of a full-size helicopter is not running, the engine is protected with an exhaust cover which prevents foreign objects finding their way inside the turbine.
This exhaust cover for model turbines is suitable for the Lama, Alouette III and any other machine with a 90 mm Ø exhaust pipe.

Caution: it is essential to allow the exhaust pipes to cool down before fitting the cover!

  • For Lama or Alouette III, pack of 1
50,50 €
Tasse incluse
Quantità
In vendita su richiesta

 

Política de seguridad

 

Política de envío

 

Política de devolución

Descrizione

When the turbine of a full-size helicopter is not running, the engine is protected with an exhaust cover which prevents foreign objects finding their way inside the turbine.
This exhaust cover for model turbines is suitable for the Lama, Alouette III and any other machine with a 90 mm Ø exhaust pipe.

Caution: it is essential to allow the exhaust pipes to cool down before fitting the cover!

  • For Lama or Alouette III, pack of 1
Dettagli del prodotto
350/17
Recensioni

Ancora nessuna recensione da parte degli utenti.

Scrivi la tua recensione

Coperchio scarico Ø 90 mm

Coperchio scarico Ø 90 mm

When the turbine of a full-size helicopter is not running, the engine is protected with an exhaust cover which prevents foreign objects finding their way inside the turbine.
This exhaust cover for model turbines is suitable for the Lama, Alouette III and any other machine with a 90 mm Ø exhaust pipe.

Caution: it is essential to allow the exhaust pipes to cool down before fitting the cover!

  • For Lama or Alouette III, pack of 1
Scrivi la tua recensione
16 autres produits dans la même catégorie :
Marchepied, pour Lama Aperçu rapide

Référence: 340/6

Marchepied, pour Lama

Commentaire(s): 0

If you have a mind to continue adding detail fittings to your Lama, you are sure to appreciate this landing gear step which can be fitted to an existing model at any time. The step is made of stainless steel, and is supplied complete with clips, screw fittings and tread material. Entry step, for Lama, pack of 1

Prix 75,60 €
Détails
En vente sur demande
Turbine factice GFK Aperçu rapide

Référence: 330/2

Turbine factice GFK

Commentaire(s): 0

The dummy turbine provides the ideal starting point if you wish to install additional scale fittings on your Lama.The dummy turbine is assembled from six separate GRP mouldings, and fits all models with VR-22 mechanics installed.In the turbine-powered version of the Lama the actual turbine is located in this position.GRP dummy turbineLength approx. 490 mm

Prix 141,80 €
Détails
En vente sur demande
Protection contre... Aperçu rapide

Référence: 340/5

Protection contre l'enlisement pour Lama

Commentaire(s): 0

When full-size helicopters have to land in deep snow, the skids are fitted with "snowboards" to prevent them sinking in.On the model they look really good, and also help the pilot detect the model's orientation in the air.Make your model an eye-catcher and use some rivets for the decoration of the skies."Snowboards" for Lama, 1 pair

Prix 99,90 €
Détails
En vente sur demande
Transmission factice Aperçu rapide

Référence: 340/13

Transmission factice

Commentaire(s): 0

This dummy power unit can be installed on turbine powered helicopters to produce an even more realistic intersection between the turbine and the gearbox.When the imitation rotor brake of the dummy part is pushed over the turbine starter, the rubber connector is spring-loaded in front of the gearbox connection; retaining screws are not required.Dummy power...

Prix 133,60 €
Détails
En vente sur demande
Kit manches à balai Aperçu rapide

Référence: 31/34

Kit manches à balai

Commentaire(s): 0

Les manches à balai et le levier de Pas font partie des équipements de base de chaque cockpit.La version illustrée correspond à ceux utilisés dans l'hélicoptère grandeur Schweizer 300 C....

Prix 34,30 €
Détails
En vente sur demande

Seguici su Facebook

Facebook