Stainless steel exhaust

Riferimento: 268/16

Exhaust for XL-C

Exhaust tubes for turbines are always designed for the specified model. It is important that no forward thrust emerges from the system. Should this still occur, the forward thrust produced is minimal.Turbine exhaust tubes are designed as exhaust-gas diffusers, i.e. opens wider towards the rear.

Riferimento: 429/16

Exhaust Bell 429

Stainless steel exhaust manufactured specifically for the Bell 429

Riferimento: 900/16

Exhaust, stainless steel

Exhaust, stainless steel, for Ecureuil

Riferimento: 9/26

Ceramic band 50x3x1000 mm

Not available

Riferimento: 342/16

Exhaust for Gazelle

Not available

Riferimento: 641/16

Exhaust system for Air-Crane

right / leftThis exhaust system is designed for the Air-Crane with turbine power system.

Riferimento: 930/16

Exhaust gas efflux for Mil Mi-2

right / leftThis exhaust system is designed for the Mil Mi-2 with turbine power system.

Riferimento: 791/16

Exhaust tube for turbine, Cobra

Exhaust tubes for turbines are always designed for the specified model. It is important that no forward thrust emerges from the system. Should this still occur, the forward thrust produced is minimal.Turbine exhaust tubes are designed as exhaust-gas diffusers, i.e. opens wider towards the rear.

Riferimento: 350/16

Exhaust system for Alouette III

Not available

Riferimento: 530/17

Tapa de escape Ø 55 mm

Riferimento: 904/16

Exhaust tube for turbine, Hughes

The shape and dimensions of the Hughes fuselages allow for the installation of a three outlet exhaust. The outlets on the left and right hand sides offer the necessary cross-section and greatly reduce the forward thrust. This keeps the scale rear outlet while only discharging a small amount of the total exhaust gas.

Riferimento: 350/17

Coperchio scarico Ø 90 mm

When the turbine of a full-size helicopter is not running, the engine is protected with an exhaust cover which prevents foreign objects finding their way inside the turbine. This exhaust cover for model turbines is suitable for the Lama, Alouette III and any other machine with a 90 mm Ø exhaust pipe. Caution: it is essential to allow the exhaust pipes to...

Riferimento: 302/16

Exhaust, stainless steel

Exhaust system for Alouette II

Riferimento: 134/16

Exhaust tube for turbine, EC 135

On the EC the forward thrust is eliminated by the scale division of the exhaust tube (enlarging of the cross-section) and exhausting up through the rotor disc.

Riferimento: 120/16

EC 120 turbine exhaust pipe

Not available

Riferimento: 530/16

Exhaust efflux for CH-53

right / left