JAKADOFSKY VSpeak ECU converter

The ECU converters are a link between the turbine electronics (generally known as the ECU) and telemetry-capable 2.4 GHz remote controls.
The measured values that are usually shown on a control unit are "converted" for connection to the telemetry channel of the respective remote control system.

With one-way telemetry systems such as Multiplex MLink, data can only be transmitted in one direction, i.e. from the model to the transmitter, whereas with two-way systems such as Jeti Duplex EX, data can be transmitted in both directions.

The telemetry and the ECU connection of the VSpeak ECU converter are galvanically isolated, to avoid repercussions / malfunction of the turbine control on the receiver system.

The VSpeak ECU converter for Jakadofsky ECUs is connected to the ECU instead of the EDT terminal.
The data shown on the status screen of the TERMINAL can be transmitted to the transmitter using the ECU converter on the telemetry return channel.
The following ECUs are supported:
Jakadofsky PRO ECU
and earlier Orbit AECU

The VSpeak ECU converter is upgradeable.

Instructions

Please state your transmitter in the comments field when ordering:

• Jeti Duplex EX
• Multiplex MLink (MSB)
• Graupner HoTT
• Futaba
• FrSky S.Port
• JR PROPO
• Spectrum (X-Bus)