Vaso Cardan para eje 8 m

Reference: 107/14

Balls chrome-plated 2.5 x 5.5 mm

Chrome-plated brass balls are used to screw onto bell cranks or servo arms for connection to the ball-links of pushrods. The chromium plating prevents premature wear of the ball links.Content of the package: 25 pieces.

Reference: 871/37

Freewheel washer 10 x 15,5 x 3,8 mm

 Content of the package1 piece

Reference: 102

Bush 3 x 5 x 2.6 mm

Pack of 2

Reference: 53/6

Main gearbox dome

If you are a fan of scale construction you won't be disappointed in the Alouette II. The model version of the gearbox housing is a reproduction of the full-size machine.The main gearbox dome is fitted in place of the dome plate supplied with the mechanics. The same ballrace is used, i.e. Ord.No. 55/5 - 10 x 21 x 5 mm.The greater size and height of the...

Reference: 61/20

Bellcrank set 60 degree

The ballraced 60° bellcrank, for example, is positioned between the horizontal pushrod from the throttle servo and the pushrod running to the barrel arm on the carburettor. When the arm below the ball is vertical the engine is stopped. When the 60° arm is horizontal the engine is at full throttle.In models with overhead tail rotor (e.g. BK 117, BO 105)...

Reference: 58/10

Roll-axis lever

 Content of the package1 piece

Reference: 870/20

Circlip for 8 mm diameter shaft

 Circlip for 8 mm Ø shaftpack of 2

Reference: 53

Dome plate GRP

At the top of the mechanics the dome plate supports the rotor shaft with the help of a 10 x 21 x 5 mm or 12 x 21 x 5 mm ballrace. To reduce the load on the ballrace a thrust bearing can also be fitted under the dome plate.

Reference: 802/64

32-tooth clutch bell

 32-tooth clutch belldouble ballracedincluding lining

Reference: 603/41

Mechanics support, front

Mechanics support, front, aluminium Content of the package: 2 piece

Reference: 607/53

Set plato ciclico BO 105 T-Rex

Reference: 1006/15

Aluminium main gear box

This is what we recommend to ensure a transfer of power of today’s electric motors with their torque:a new aluminium main gear box Ord.No. 1006/15 steel internal tooth gear with matching clutch bell Ord.No. 36/48.

Reference: 7/50

Side frame left

Component part for foxy, Ord.No. 7007

Reference: 36/40

Reinforced freewheel bell compl.

Provided that you maintain your model helicopter conscientiously and set it up according to the instructions, the model's flying load limits are well outside its normal flight envelope.Detail features of the kit are designed to suit normal applications, but different parts can be retro-fitted at any time, e.g. if you wish to convert a Kobold into a...

Reference: 251/49

Collet 8 mm

Not available

Reference: 57/1

Bush 3 x 5 x 6.5 mm

for Ord.No. 57/10 and 58/10Pack of 2