Ninguna marca
Referencia: 92/91
Brida rodamientos autolubricantes 6 x 10 x 3 mm
Política de seguridad
Política de envío
Política de devolución
Para evitar que los tornillos se aflojen (p. Ej., Debido a vibraciones), use un bloqueo de tornillo.
Si utiliza un bloqueo de tornillo cuando atornilla tornillos, tenga en cuenta las diferentes propiedades.
El azul medio firme se puede resolver con buenas herramientas. El verde de alta resistencia se mantiene tan firmemente que la conexión solo se puede aflojar en caliente. Esto podría conducir a un problema "insoluble" con piezas de plástico.
Puede lograr la dosis correcta con la aguja Loctite.
Threadlocker, alta resistencia, 10 ml
No hay reseñas de clientes en este momento.
Riferimento: 11/0
Allen key set, extra-length, with ball-end. Contains all sizes for mechanics, including imperial Allen key for damaged grubscrews.
Riferimento: 10/2
Heat-shrink sleeving is a highly versatile material, and is useful for aerial joints, wire tailskids, and as security for transmitter strap clips. Heat shrink sleeve set 2 mm, 3.1 mm and 5.5 mm Ø, two of each, 25 cm long Tip For absolute water and dust proof protection of patch cables use a larger heat shrink sleeve over the patch cable and fill both...
Riferimento: 11/39
The fine point screwdriver set contains 6 selected socket spanners for 12 different applications: for M 3 and M 4 grubscrews, M 3 and M 4 socket-head cap screws (with ball-shaped head each), and for large and small slot-head scews; all together with a ball-link driver (4 mm connection), a handy grip and a tool bag. Insert the required socket spanner to...
Riferimento: 11/41
A Loctite pin is an essential tool for every workshop. Using the pin it is easy to apply the quantity of fluid you need in small threaded holes. The pin is chrome-plated so that the fluid can easily be wiped off again.
Riferimento: 10/367
All mechanics require the correct lubrication: not too much and not too little. If friction is low, the rate of wear is reduced. This lubricant set includes both lubricants required for complete protection of the mechanics. When re-greasing check carefully that no grit is allowed into the lubricant (abrasive effect), and clean all parts before...
