Set de estabilziador largo 275mm

Reference: 800/19

Tail skid white

Tail skids only. Create your own individual colour scheme: e.g. white stabiliser - red skid!

Reference: 260/17

Centre bearing set

 Centre bearing setincluding 2 O-ringsexcluding ballrace

Reference: 809/24

Kühlluftschacht Skyfox, rauchglas

Reference: 890/5

Kufenauflage

Reference: 21/7

Conjunto estabilizador negro

Reference: 24/7

Conducto de aire de enfriamiento para foxy

Reference: 260/11

Stabiliser set, XLV

GRP Stabiliser set for XLV Trainer.

Reference: 809/6

RC-Vorbau Sky Fox

Reference: 800/21

Tail skid yellow

Tail skids only. Create your own individual colour scheme: e.g. white stabiliser - red skid!

Reference: 830/10

Streben für Benzin-Trainer

Reference: 800/4

Stabiliser set white

Instead of a horizontal fin (for mounting on the tail boom) the small inset horizontal panel replaces that. The inset fits on top of the stabiliser, outwards opposite of the tail rotor.220 mm high, excl. tail skid3-part, 45 g total weight

Reference: 722/39

Support for motor

Support for motor

Reference: 800/6

Stabiliser set yellow

Instead of a horizontal fin (for mounting on the tail boom) the small inset horizontal panel replaces that. The inset fits on top of the stabiliser, outwards opposite of the tail rotor.220 mm high, excl. tail skid3-part, 45 g total weight

Reference: 870/41

Untere Edelstahl-Träger 8 mm

Reference: 800/37

Canopy holder 26 mm

The required length of the canopy holder is determined by the kind of canopy and the location of its fitting points on the side frames.

Reference: 310/8

Tuned pipe holder 2-part

GRP tuned pipe holders are used to secure the tuned pipe to the tail booms. They are easy to clamp in place. The tail pipe of the tuned pipe should be covered with silicone hose (Order No. 116/8), or with one of the tail pipes (Ord.No. 116/0 or 116/9), so that the heat of the pipe does not damage the holder.Tuned pipe holder, 2-partfor 20 mm ��tail boom