Varilla de empuje curvada, 2.5 x 72 mm

Reference: 70/130-2

Gestänge 3,0 x 130 mmOrd.No. 70/130-2

Reference: 70/40

Pushrod 2.5 x 40 mm

Ready-made pushrod, threaded M 2.5, approx. 8 mm thread length each end. Content of the package: 1 piece

Reference: 89/2

Pushrod cranked, 2.5 x 82 mm

On 2-blade rotor heads with flybar the angled pushrods connect the pitch compensator with the control bridge.Ready-made pushrod, threaded M 2.5, approx. 8 mm thread length each end. Pack of 2.

Reference: 70/175

Pushrod 2.5 x 175 mm

Ready-made pushrod, threaded M 2.5, approx. 8 mm thread length each end. Content of the package: 1 piece

Reference: 70/150-2

Gestänge 3,0 x 150 mmOrd.No. 70/150-2

Reference: 70/40-5

Gestänge 2,5 x 40 mmOrd.No. 70/40-5

Reference: 70/91-2

Gestänge 3,0 x 90 mmOrd.No. 70/91-2

Reference: 70/70-4

Gestänge 2,5 x 70 mmOrd.No. 70/70-4

Reference: 70/90-2

Gestänge 2,5 x 90 mmOrd.No. 70/90-2

Reference: 70/121

Pushrod 3.0 x 120 mm

Ready-made pushrod, threaded M 3. Content of the package: 1 piece

Reference: 70/83-4

Gestänge 3,0 x 83 mmOrd.No. 70/83-4

Reference: 89/4

Pushrod cranked, 2.5 x 91 mm

On 2-blade rotor heads with flybar the angled pushrods connect the pitch compensator with the control bridge.Ready-made pushrod, threaded M 2.5, approx. 8 mm thread length each end. Pack of 2

Reference: 70/135-2

Gestänge 2,5 x 135 mmOrd.No. 70/135-2

Reference: 70/60-4

Varilla de empuje 2.5 x 60 mm

Reference: 70/101

Pushrod 3.0 x 100 mm

Ready-made pushrod, threaded M 3. Content of the package: 1 piece

Reference: 70/180

Pushrod 2.5 x 180 mm

Ready-made pushrod, threaded M 2.5, approx. 8 mm thread length each end. Content of the package: 1 piece