Tubo de cola de 31 x 1300 mm

Riferimento: 313

Braccio di coda di 20 x 0,5 x 790 mm

 Tail boom20 x 0.5 x 790 mmblackweight 59 gTail booms with a wall thickness of 0.5 mm are specially tested for the use in models with electric drive only and must not be used for models powered by combustion engines! The wall thickness is just 0.5 mm for the reduction of weight. Comparative, the weight of a tail boom with 0.8 x 20 x 790 mm is 109 g.

Riferimento: 800/28

Führung für 20 mm Heckrohr

Riferimento: 834/70

Supporto del braccio posteriore, 25 mm

A 2-part GRP tail boom holder keeps a firm hold on the 25 mm ��tail boom. The tail boom holder is screwed between the side frames with socket-head cap screws M 3 x 55 (Ord.No. 90135).

Riferimento: 21/3

Steuerstange 2 x 250 mm, Eisen verzinkt

Riferimento: 305

Braccio di coda di 20 x 0,8 x 780 mm

 Tail boom20 x 0.8 x 780 mmblack

Riferimento: 304/5

Barra di coda 20 x 0,8 x 780 mm nero

Not available

Riferimento: 429/13

Leva posteriore Bell 429 25x1180mm

Not available

Riferimento: 722/46

Kupplungslager Heckrohr

Riferimento: 309

Braccio di coda di 20 x 0,8 x 710 mm

 Tail boom20 x 0.8 x 710 mmblack

Riferimento: 800/2

Leitwerkhalter 20 mm, 2-teilig

Riferimento: 870/3

Heckrotorhalter, Alu

Riferimento: 49/1

Glocke mit Stellring

Riferimento: 840/13

Braccio di coda ballraced 20 x 0,8 x 780

 Aluminium tail boom0.8 mm wall thickness20 mm outside Øballraced for 6 mm Ø stainless steel drive shaft, 17/16

Riferimento: 314

Tail boom de 25 x 0,8 x 790 mm, violeta

Tail boomdimensions: 25 x 0.8 x 790 mmblack

Riferimento: 322

Braccio della coda di 20 x 0,8 x 780 mm, blue

 Tail boom20 x 0.8 x 780 mmblue

Riferimento: 870/17

Leitwerkadapter 2teilig