Filtrer par

Prix

Prix

  • 12,00 € - 131,00 €

Catégories

Catégories

Marques

No brand

Fournisseurs

Référence: 92/91

Flanged ballrace 6 x 10 x 3 mm

Commentaire(s): 0

Ballraces are used wherever moving parts are required to run with a minimum of play and a minimum of friction. The more ballraces are used, the more smoothly the mechanics of a helicopter works, and the lower the rate of wear. The dimensions of a ballrace mean: inside diameter (I.D.) x outside diameter (O.D.) x thickness. For flanged bearings the same...

Prix 14,70 €
Détails
En vente sur demande
Toutes les meilleures ventes
Outillages/colles/lubrifiants

Outillages/colles/lubrifiants

Outillages/colles/lubrifiants

Il y a 27 produits.

Affichage 1-12 de 27 article(s)

Filtres actifs

  • Catégories : Clefs
  • Catégories : Gabarits
  • Catégories : Kits
  • Catégories : Pinces

Référence: 11/91

Open-end spanner, size 4 and 5

Commentaire(s): 0

For real pleasure in modelling a comprehensive set of tools is indispensable, as it ensure that you always have the right tool for the job on hand. These small open-ended spanners are perfect for tightening or undoing standard and self-locking nuts, in the sizes M 2, M 2.5, M 3, M 4 etc. The range available covers all the sizes which are required for a...

Prix 14,80 €
Détails
En vente sur demande

Référence: 11/0

Allen key set, 7-part

Commentaire(s): 0

Allen key set, extra-length, with ball-end. Contains all sizes for mechanics, including imperial Allen key for damaged grubscrews.

Prix 26,60 €
Détails
En vente sur demande

Référence: 11/27

Circlip pliers

Commentaire(s): 0

Installing and removing the circlip on the main rotor shaft, these circlip pliers do the job and will not damage the circlip. The prongs of the pliers fit exactly in the holes in the circlip and open it evenly, without over-stressing it, so that it can safely be re-used. If you use other tools such as screwdrivers etc. the circlip is easily damaged or...

Prix 36,50 €
Détails
En vente sur demande

Référence: 11/92

Open-end spanner, size 4.5 and 5.5

Commentaire(s): 0

For nut M 2 (flat) + nut M 3. For real pleasure in modelling a comprehensive set of tools is indispensable, as it ensure that you always have the right tool for the job on hand. These small open-ended spanners are perfect for tightening or undoing standard and self-locking nuts, in the sizes M 2, M 2.5, M 3, M 4 etc. The range available covers all the...

Prix 14,80 €
Détails
En vente sur demande

Référence: 11/39

Fine-point screwdriver set

Commentaire(s): 0

The fine point screwdriver set contains 6 selected socket spanners for 12 different applications: for M 3 and M 4 grubscrews, M 3 and M 4 socket-head cap screws (with ball-shaped head each), and for large and small slot-head scews; all together with a ball-link driver (4 mm connection), a handy grip and a tool bag. Insert the required socket spanner to...

Prix 94,20 €
Détails
En vente sur demande

Référence: 11/31

Wire cutters for steel wire

Commentaire(s): 0

The 2 mm pushrod from the tail rotor servo to the tail rotor bellcrank is made of hardened steel, as is the 2 mm tail rotor shaft. If you need to cut this material to length you need wire cutters which cut cleanly. These wire cutters are the ideal tool for cutting hardened steel wire. Wear protective goggles!

Prix 54,60 €
Détails
En vente sur demande

Référence: 11/93

Open-end spanner, size 6 and 7

Commentaire(s): 0

For nut M 3.5 + nut M 4. For real pleasure in modelling a comprehensive set of tools is indispensable, as it ensure that you always have the right tool for the job on hand. These small open-ended spanners are perfect for tightening or undoing standard and self-locking nuts, in the sizes M 2, M 2.5, M 3, M 4 etc. The range available covers all the sizes...

Prix 14,80 €
Détails
En vente sur demande

Référence: 11/37

All-purpose pliers

Commentaire(s): 0

With these practical, small general purpose pliers you can reach almost all your mechanical parts. These pliers rest nicely in your hand because of the non-slip grips. Overall length 12 cm

Prix 12,80 €
Détails
En vente sur demande

Référence: 11/15

Pocket Allen key set

Commentaire(s): 0

This practical pocket-sized tool contains a set of fold out Allen keys in exactly the sizes you need when working on model helicopters. The set is compact and handy, all the keys are ready to use at any time, and the small keys will not longer disappear whenever you glance away. The pocket Allen key set is ideal for use at the flying site.  Pocket Allen...

Prix 36,50 €
Détails
En vente sur demande

Référence: 11/94

Open-end spanner, size 7 and 8

Commentaire(s): 0

For nut M 4 + nut M 5. For real pleasure in modelling a comprehensive set of tools is indispensable, as it ensure that you always have the right tool for the job on hand. These small open-ended spanners are perfect for tightening or undoing standard and self-locking nuts, in the sizes M 2, M 2.5, M 3, M 4 etc. The range available covers all the sizes...

Prix 14,80 €
Détails
En vente sur demande

Suivez-nous sur Facebook