Marken

Keine Marke

Lieferanten
Alle Verkaufshits

La palanca acodada, Alu

703/41
Bewertung 
32,30 €
Bruttopreis
Menge
Verkauf auf Anfrage

 

Política de seguridad

 

Política de envío

 

Política de devolución

Beschreibung

La palanca acodada, Alu

Artikeldetails
703/41
Bewertungen

Aktuell keine Kunden-Kommentare

Eigenen Kommentar verfassen

La palanca acodada, Alu

La palanca acodada, Alu

Eigenen Kommentar verfassen
16 autres produits dans la même catégorie :

Référence: 86/10

Ball collet 5 mm

Commentaire(s): 0

Ball collets provide the fixation of double ball-links on the flybar, in order to settle the essential distance to the rocker.Ball collet 5 mm Ø, pack of 2, chrome-plated.

Prix 19,40 €
Détails
En vente sur demande

Référence: 117/20

Thrust bearing set complete

Commentaire(s): 0

The standard version of our mechanics includes ground thrust bearing shafts with a of 8 mm Ø and a length of 110 mm.Thrust bearings absorb the high centrifugal forces exerted by the main rotor blades. The effect of the axial bearings is retained in full when the blade holders rotate.Thrust bearing set, complete as shown.

Prix 54,60 €
Détails
En vente sur demande

Référence: 74/14

O-ring 3 x 16 mm soft

Commentaire(s): 0

O-ring 3 x 16 mm soft Content of the package: 8 pieces Tip: O-rings always slide with a drop of silicone oil onto the shaft.

Prix 6,30 €
Détails
En vente sur demande

Référence: 74/21

O-ring 3.5 x 12 mm hard

Commentaire(s): 0

O-ring 3.5 x 12 mm hard Content of the package: 8 pieces Tip: O-rings always slide with a drop of silicone oil onto the shaft.

Prix 27,40 €
Détails
En vente sur demande

Référence: 78/41

Mixer lever cranked

Commentaire(s): 0

Mixer lever, content of the package 1 piece.Additionial accessories for the use of mixer levers are either two flanged ballraces or two flanged bushes from Delrin as a low cost alternative. The screwing on the blade holder arm complies with the kind of hole, i.e. it depends on the through hole or on the blind hole. Please note for choosing the screws:...

Prix 17,00 €
Détails
En vente sur demande

Référence: 87/4

Chape double 90°

Commentaire(s): 0

A 90° twisted double ball-link connect the mixer lever to the ball collet on the flybar. Content of the package: 2 pieces

Prix 11,20 €
Détails
En vente sur demande

Folgen Sie uns auf Facebook