Rigid-Rotorkopf bis 2500 mm für 12 mm WelleOrd.No. 1005/49

Riferimento: 706/20

6-Blatt Rotorkopf für Ø 12 mm Welle

Riferimento: 702/60

Rotore a 2 pale rigide 10 mm

CSS stands for Cyclic Speed System at this rotor head because the cyclic control occurs more spontaneous.As, for example, a Jet Ranger or an AIRWOLF requires a true-scale look in the air, a rotor head without a flybar is part of the scale detail for these helicopters. Because of its exact reactions in flight we recommend this CSS rotor head.Only the...

Riferimento: 705/32

testa rotore per cinque pale, Ø 12 mm

Not available

Riferimento: 702/70

Scala semi-rotore

This semi-scale rotor head includes additional mixing of the blade holder actuator linkage at a ratio of 2 : 1. This results in well-balanced flying characteristics, and the model has a damped rather than direct response to your control inputs (resembling a 2-blade head with flybar).Use only the suggested rotor blades for flybar-less rotor heads,...

Riferimento: 704/34

Testa rotore 4 pale, 12 mm

drilling ø 8 mm

Riferimento: 1005/52

Testa rigida per rotori da più di 2500 mm

Ord.No. 1005/52 is for a Ø 15 mm rotor shaft and Ord.No. 1005/49 for Ø 12 mm rotor shaft

Riferimento: 702/62

Rotore a 2 pale rigide 12 mm

Not available

Riferimento: 702/59

Toothed belt pulley 17-tooth XL Ø8mm

Not available

Riferimento: 704/37

4-blade rotor head 12 mm

Not available

Riferimento: 1005/61

Pignone per cinghia, XL, 20 denti

Because of the high established demand on a rotor head being used in a mechanics driven by a petrol engine, the equipment is quite different from other rotor heads.Here flybars with 5 mm Ø are used, and the ball collets, the control bridge and the ballraces are applicable for this dimension. The aluminium centre piece accounts for the necessary precision...

Riferimento: 1005/62

Rotorkopf für Turbinen-MechanikOrd.No. 1005/62

Riferimento: 1005/12

Testa rotore per Bell 212

The basic method of operation of the turbine-powered Bell 212's rotor head is the same as that of the Bell 47 G III rotor head. The main difference is that the components have been modified to match the appearance of the Bell 212, and are therefore of different design. For example, a separate swashplate driver is not required, as it is integrated into the...

Riferimento: 703/30

Testa del rotore a 3 pale 10 mm

Riferimento: 702/75

Scala semi-rotante

Riferimento: 1005/59

Rotorkopf für TurbineOrd.No. 1005/59

Riferimento: 722/72

Testa rotore VR-22

The loading of every component of this rotor system is designed to take a multiple of the actual forces. We are looking here at purely safety reserves and under no cirumstances should they be used for experimental purposes.Because of the special requirements of materials used in the rotor head, we expressly recommend that only genuine VARIO spare parts...