Home
Marchi

Nessuna marca

Fornitori
Migliori vendite
Flanged ballrace 6 x 10 x 3 mm Anteprima

Riferimento: 92/91

Flanged ballrace 6 x 10 x 3 mm

Recensioni: 0

Ballraces are used wherever moving parts are required to run with a minimum of play and a minimum of friction. The more ballraces are used, the more smoothly the mechanics of a helicopter works, and the lower the rate of wear. The dimensions of a ballrace mean: inside diameter (I.D.) x outside diameter (O.D.) x thickness. For flanged bearings the same...

Prezzo 14,70 €
Più
In vendita su richiesta
Aste 3,0 x 75 mm Anteprima

Riferimento: 70/76

Aste 3,0 x 75 mm

Recensioni: 0

Ready-made pushrod, threaded M 3. Content of the package: 1 piece

Prezzo 6,30 €
Più
In vendita su richiesta
Tutte le migliori vendite

Testa rotore per Bell 212

1005/12
Valutazione 

The basic method of operation of the turbine-powered Bell 212's rotor head is the same as that of the Bell 47 G III rotor head. The main difference is that the components have been modified to match the appearance of the Bell 212, and are therefore of different design. For example, a separate swashplate driver is not required, as it is integrated into the overall system.

Due to the shared design features, this rotor head's flying characteristics are similar to those of the Bell 47 G III, and can be classed as very nicely balanced and easy to fly. It is certainly possible to operate this rotor head without supplementary electronic aids for swashplate control.

The rotor head presented here should be used exclusively with the rotor blades 413.
Rotor shaft 12 mm, rotor disc 2360 mm

685,70 €
Tasse incluse
Quantità
In vendita su richiesta

 

Política de seguridad

 

Política de envío

 

Política de devolución

Descrizione

The basic method of operation of the turbine-powered Bell 212's rotor head is the same as that of the Bell 47 G III rotor head. The main difference is that the components have been modified to match the appearance of the Bell 212, and are therefore of different design. For example, a separate swashplate driver is not required, as it is integrated into the overall system.

Due to the shared design features, this rotor head's flying characteristics are similar to those of the Bell 47 G III, and can be classed as very nicely balanced and easy to fly. It is certainly possible to operate this rotor head without supplementary electronic aids for swashplate control.

The rotor head presented here should be used exclusively with the rotor blades 413.
Rotor shaft 12 mm, rotor disc 2360 mm

Dettagli del prodotto
1005/12
Documenti Allegati
Scarica
1005/12

Scarica (1.31M)
Recensioni

Ancora nessuna recensione da parte degli utenti.

Scrivi la tua recensione

Testa rotore per Bell 212

Testa rotore per Bell 212

The basic method of operation of the turbine-powered Bell 212's rotor head is the same as that of the Bell 47 G III rotor head. The main difference is that the components have been modified to match the appearance of the Bell 212, and are therefore of different design. For example, a separate swashplate driver is not required, as it is integrated into the overall system.

Due to the shared design features, this rotor head's flying characteristics are similar to those of the Bell 47 G III, and can be classed as very nicely balanced and easy to fly. It is certainly possible to operate this rotor head without supplementary electronic aids for swashplate control.

The rotor head presented here should be used exclusively with the rotor blades 413.
Rotor shaft 12 mm, rotor disc 2360 mm

Scrivi la tua recensione
16 otros productos en la misma categoría:
Rotor principal Chinook Vista rápida

Referencia: 703/480

Rotor principal Chinook

Reseña(s): 0

For use on Ord. No. 4800 only !! Other rotorheads cannot be used on this model. Two rotor heads are required for Ord.No. 4800.

Precio 901,90 €
Más
En venta bajo pedido

Seguici su Facebook

Facebook