Home
Marchi

Nessuna marca

Fornitori
Migliori vendite
Flanged ballrace 6 x 10 x 3 mm Anteprima

Riferimento: 92/91

Flanged ballrace 6 x 10 x 3 mm

Recensioni: 0

Ballraces are used wherever moving parts are required to run with a minimum of play and a minimum of friction. The more ballraces are used, the more smoothly the mechanics of a helicopter works, and the lower the rate of wear. The dimensions of a ballrace mean: inside diameter (I.D.) x outside diameter (O.D.) x thickness. For flanged bearings the same...

Prezzo 14,70 €
Più
In vendita su richiesta
Aste 3,0 x 75 mm Anteprima

Riferimento: 70/76

Aste 3,0 x 75 mm

Recensioni: 0

Ready-made pushrod, threaded M 3. Content of the package: 1 piece

Prezzo 6,30 €
Più
In vendita su richiesta
Tutte le migliori vendite

Rotore a 2 pale rigide 10 mm

702/60
Valutazione 

CSS stands for Cyclic Speed System at this rotor head because the cyclic control occurs more spontaneous.
As, for example, a Jet Ranger or an AIRWOLF requires a true-scale look in the air, a rotor head without a flybar is part of the scale detail for these helicopters. Because of its exact reactions in flight we recommend this CSS rotor head.
Only the swashplate driver Ord.No. 68/20 is suitable for this rotor head.

259,00 €
Tasse incluse
Quantità
In vendita su richiesta

 

Política de seguridad

 

Política de envío

 

Política de devolución

Descrizione

CSS stands for Cyclic Speed System at this rotor head because the cyclic control occurs more spontaneous.
As, for example, a Jet Ranger or an AIRWOLF requires a true-scale look in the air, a rotor head without a flybar is part of the scale detail for these helicopters. Because of its exact reactions in flight we recommend this CSS rotor head.
Only the swashplate driver Ord.No. 68/20 is suitable for this rotor head.

Dettagli del prodotto
702/60
Documenti Allegati
Scarica
702/60

Scarica (142.24k)
Recensioni

Ancora nessuna recensione da parte degli utenti.

Scrivi la tua recensione

Rotore a 2 pale rigide 10 mm

Rotore a 2 pale rigide 10 mm

CSS stands for Cyclic Speed System at this rotor head because the cyclic control occurs more spontaneous.
As, for example, a Jet Ranger or an AIRWOLF requires a true-scale look in the air, a rotor head without a flybar is part of the scale detail for these helicopters. Because of its exact reactions in flight we recommend this CSS rotor head.
Only the swashplate driver Ord.No. 68/20 is suitable for this rotor head.

Scrivi la tua recensione
16 autres produits dans la même catégorie :
Tête 3-pales 10 mm Aperçu rapide

Référence: 703/30

Tête 3-pales 10 mm

Commentaire(s): 0

Des têtes de rotor avec trois ou plusieurs pales constituent un chapitre à part dans le domaine de l'hélicoptère modèle réduit. Nombreux pilotes ressentent l'envie de piloter un jour une...

Prix 243,50 €
Détails
En vente sur demande
Tête 5-pales 12 mm Aperçu rapide

Référence: 705/32

Tête 5-pales 12 mm

Commentaire(s): 0

Des têtes de rotor avec trois ou plusieurs pales constituent un chapitre à part dans le domaine de l'hélicoptère modèle réduit. Nombreux pilotes ressentent l'envie de piloter un jour une...

Prix 371,00 €
Détails
En vente sur demande
Tête 4-pales 10 mm Aperçu rapide

Référence: 704/30

Tête 4-pales 10 mm

Commentaire(s): 0

Des têtes de rotor avec trois ou plusieurs pales constituent un chapitre à part dans le domaine de l'hélicoptère modèle réduit. Nombreux pilotes ressentent l'envie de piloter un jour une...

Prix 320,00 €
Détails
En vente sur demande
Tête rotor Benzin mécanique... Aperçu rapide

Référence: 1005/60

Tête rotor Benzin mécanique 10 mm

Commentaire(s): 0

Because of the high established demand on a rotor head being used in a mechanics driven by a petrol engine, the equipment is quite different from other rotor heads.Here flybars with 5 mm Ø are used, and the ball collets, the control bridge and the ballraces are applicable for this dimension. The aluminium centre piece accounts for the necessary precision...

Prix 300,90 €
Détails
En vente sur demande
Tête de rotor VR-22 Aperçu rapide

Référence: 722/72

Tête de rotor VR-22

Commentaire(s): 0

The loading of every component of this rotor system is designed to take a multiple of the actual forces. We are looking here at purely safety reserves and under no cirumstances should they be used for experimental purposes.Because of the special requirements of materials used in the rotor head, we expressly recommend that only genuine VARIO spare parts...

Prix 554,40 €
Détails
En vente sur demande
Tête rotor pour Bell... Aperçu rapide

Référence: 1005/12

Tête rotor pour Bell 212Ord.No. 1005/12

Commentaire(s): 0

The basic method of operation of the turbine-powered Bell 212's rotor head is the same as that of the Bell 47 G III rotor head. The main difference is that the components have been modified to match the appearance of the Bell 212, and are therefore of different design. For example, a separate swashplate driver is not required, as it is integrated into the...

Prix 685,70 €
Détails
En vente sur demande
Tête de rotor semi-maquette... Aperçu rapide

Référence: 702/80

Tête de rotor semi-maquette SKS

Commentaire(s): 0

The UH-1D or UH-1B models with an excessive length of the rotor shaft out of the mechanics fly for safety reasons with rotor shafts of 12 mm Ø. The difference between the SKS semi-scale rotor heads on offer is due to the centre hub. This version fits the shaft diameter of 12 mm.We recommend this rotor head for experenced pilots only.The performance of...

Prix 375,70 €
Détails
En vente sur demande

Seguici su Facebook

Facebook