Scala semi-rotore

Reference: 705/36

5-blade rotor head 12 mm

Not available

Reference: 706/20

6-Blatt Rotorkopf für Ø 12 mm Welle

Reference: 703/35

3 blade rotor head, 10 mm

Not available

Reference: 703/34

3 blade rotor head, 12 mm

Not available

Reference: 702/75

Semi scale rotor head

With the SKS semi-scale rotor head you will take the advantage of a mechanical gyro system with a delay in control commands caused by the flybar level.This system suits the scale looks of a UH-1D....

Reference: 703/40

3-blade rotor head for 12 mm, for Lama

Large models require strong, rigid rotor heads which are designed to cope with the demands of a rotor disc of commensurate size, and are built for mounting on a 12 mm Ø rotor shaft. The only...

Reference: 703/480

Chinook rotorhead

 For use on Ord. No. 4800 only !! Other rotorheads cannot be used on this model.Two rotor heads are required for Ord.No. 4800.

Reference: 704/37

4-blade rotor head 12 mm

Not available

Reference: 1005/59

Rotorkopf für TurbineOrd.No. 1005/59

Reference: 703/39

Scale rotor head for Vario Lama

Lama Scale Rotorhead: for the large Vario LamaWe have now finalized our tests with the Starwood Lama scale rotorhead on the Vario Lama 1:4. Now we are proud to present to you under the Ord.No. 703/39, a truly Scale rotor head including all necessary parts in order to mount this head on the Vario Lama.The head is available now. The kit includes the...

Reference: 705/35

5-blade rotor head 10 mm

Rotor heads with three or more rotor blades really deserve their own chapter in any discussion of model helicopters; speculation is always in the air at such times, because sooner or later most...

Reference: 1005/47

Bell 47 G rotor head

This rotor head was modelled as closely as possible on the original version installed on the Bell 47 G full-size helicopter. It is an excellent choice for use on the Bell 47 G III model, Ord. No. 4700.The centrifugal weights and springs are dummies, and do not work. The rotor blade swivel limits are also imitations, and have no function.The blade grips...

Reference: 704/30

4-blade rotor head 10 mm

Rotor heads with three or more rotor blades really deserve their own chapter in any discussion of model helicopters; speculation is always in the air at such times, because sooner or later most...

Reference: 704/34

4-blade rotor head 12 mm

Rotor heads with three or more rotor blades really deserve their own chapter in any discussion of model helicopters; speculation is always in the air at such times, because sooner or later most...

Reference: 703/94

Scale rotor head for Alouette II

This rotor head will please all the scale fanatics amongst you. It is aimed for use with all mechanical versions of the Vario Alouette II, no matter if it is the Benzin version or for electric, methanol or for PHT2. This aluminium beauty is satisfying all the aesthetic requirements and will definitively make your Alouette II look nicer. Vario’s main point...

Reference: 702/62

Rigid 2 blade rotor head 12 mm

Not available