Ninguna marca
Referencia: 92/91
Brida rodamientos autolubricantes 6 x 10 x 3 mm
Política de seguridad
Política de envío
Política de devolución
No hay reseñas de clientes en este momento.
Reference: 36/11
The freewheel hubs are sealed on both sides by brass rings; the rings can also be replaced when necessary (i.e. when the freewheel bearings are replaced).Pack of 2
Reference: 49/55
This slotted connection shaft holds the loop of the 2 mm tail drive wire. Like all other tail drive systems it is necessary to install "play" (approx. 1 mm) for the wire. Yoke connector5 mm diameter shaft
Reference: 830/50
Side frame for petrol mechanics. The two side frames are identical in size an shape. Content of the package: 1 piece.
Reference: 36/40
Provided that you maintain your model helicopter conscientiously and set it up according to the instructions, the model's flying load limits are well outside its normal flight envelope.Detail features of the kit are designed to suit normal applications, but different parts can be retro-fitted at any time, e.g. if you wish to convert a Kobold into a...
Reference: 1002/32
If you prefer to mount the tail rotor servo in the mechanics rather than inside the fuselage, this is the accessory you need.
Reference: 61/20
The ballraced 60° bellcrank, for example, is positioned between the horizontal pushrod from the throttle servo and the pushrod running to the barrel arm on the carburettor. When the arm below the ball is vertical the engine is stopped. When the 60° arm is horizontal the engine is at full throttle.In models with overhead tail rotor (e.g. BK 117, BO 105)...
