Marcas

Ninguna marca

Proveedores
Los productos más vendidos

Macho de M 2.0 HSS

11/76
Valoración 
Pulse M 2,0 HSS
29,80 €
En venta bajo pedido
Cantidad
En venta bajo pedido

 

Política de seguridad

 

Política de envío

 

Política de devolución

Descripción
Pulse M 2,0 HSS
Detalles del producto
11/76
Reseñas

No hay reseñas de clientes en este momento.

Escriba su propia reseña

Macho de M 2.0 HSS

Macho de M 2.0 HSS

Pulse M 2,0 HSS
Escriba su propia reseña
16 autres produits dans la même catégorie :

Référence: 11/71

Twist drill 2.0 mm

Commentaire(s): 0

When screwing together parts in the mechanics (direct linkage) Allen screws are preferable to normal screws; use M 2.5 for Futaba servos and M 3 for Graupner / JR servos. We supply all required sizes of drills and taps for the work on your model helicopter.

Prix 5,50 €
Détails
En vente sur demande

Référence: 90/5

Ratchet tool holder

Commentaire(s): 0

When you need a threaded hole in a workpiece, you just drill a core hole, then drive a tap into it to cut the thread. The best method of thread-cutting by hand is to use a ratchet tool holder, as this gives you the best chance of keeping the thread "straight". The ratchet can be switched to right-hand and left-hand locking, plus a rigid (no ratchet)...

Prix 37,80 €
Détails
En vente sur demande

Référence: 11/72

Twist drill 2.5 mm

Commentaire(s): 0

When screwing together parts in the mechanics (direct linkage) Allen screws are preferable to normal screws; use M 2.5 for Futaba servos and M 3 for Graupner / JR servos. We supply all required sizes of drills and taps for the work on your model helicopter.

Prix 5,50 €
Détails
En vente sur demande

Référence: 11/69

Drill set 4-part

Commentaire(s): 0

Most hardware stores offer a very good range of tools like drills. However, when you need special sizes for our special helicopter application, it is very helpful to have a drill set handy which includes exactly the right diameters.  Typical applications: Drill 1.8 mm Ø for flange-head self-tapping screwsDrill 2.0 mm Ø for M 2.5 threadsDrill 2.5 mm...

Prix 19,90 €
Détails
En vente sur demande

Référence: 11/79

Tap M 4.0 HSS

Commentaire(s): 0

Good thread-cutting oil is as important as the tap, as it extends the useful life of the tool several times over.

Prix 19,90 €
Détails
En vente sur demande

Référence: 11/43

Hole-cutter, 3 to 14 mm diameter, with handle

Commentaire(s): 0

The pointed tip and the extremely sharp, double-edged blade of this tool are particularly good for cutting holes in thin materials such as GRP and other plastics. The hole-cutter requires no centre-punching and no pilot-hole, and produces a neat hole of infinitely variable diameter within the range 3 to 14 mm. The handle doubles as protection and storage...

Prix 43,90 €
Détails
En vente sur demande

Référence: 11/87

Twist drill 1.8 mm

Commentaire(s): 0

When screwing together parts in the mechanics (direct linkage) Allen screws are preferable to normal screws; use M 2.5 for Futaba servos and M 3 for Graupner / JR servos. We supply all required sizes of drills and taps for the work on your model helicopter.

Prix 5,50 €
Détails
En vente sur demande

Référence: 11/55

Tap M 5.0 HSS

Commentaire(s): 0

Good thread-cutting oil is as important as the tap, as it extends the useful life of the tool several times over.

Prix 19,90 €
Détails
En vente sur demande

Référence: 11/88

Twist drill 3.2 mm

Commentaire(s): 0

When screwing together parts in the mechanics (direct linkage) Allen screws are preferable to normal screws; use M 2.5 for Futaba servos and M 3 for Graupner / JR servos. We supply all required sizes of drills and taps for the work on your model helicopter.

Prix 5,50 €
Détails
En vente sur demande

Référence: 11/78

Tap M 3.0 HSS

Commentaire(s): 0

Good thread-cutting oil is as important as the tap, as it extends the useful life of the tool several times over.

Prix 28,10 €
Détails
En vente sur demande

Référence: 11/75

Twist drill 2.2 mm

Commentaire(s): 0

When screwing together parts in the mechanics (direct linkage) Allen screws are preferable to normal screws; use M 2.5 for Futaba servos and M 3 for Graupner / JR servos. We supply all required sizes of drills and taps for the work on your model helicopter.

Prix 5,50 €
Détails
En vente sur demande

Référence: 11/73

Twist drill 2.8 mm

Commentaire(s): 0

When screwing together parts in the mechanics (direct linkage) Allen screws are preferable to normal screws; use M 2.5 for Futaba servos and M 3 for Graupner / JR servos. We supply all required sizes of drills and taps for the work on your model helicopter.

Prix 5,50 €
Détails
En vente sur demande

Síganos en Facebook