Home
Marchi

Nessuna marca

Fornitori
Migliori vendite
Flanged ballrace 6 x 10 x 3 mm Anteprima

Riferimento: 92/91

Flanged ballrace 6 x 10 x 3 mm

Recensioni: 0

Ballraces are used wherever moving parts are required to run with a minimum of play and a minimum of friction. The more ballraces are used, the more smoothly the mechanics of a helicopter works, and the lower the rate of wear. The dimensions of a ballrace mean: inside diameter (I.D.) x outside diameter (O.D.) x thickness. For flanged bearings the same...

Prezzo 14,70 €
Più
In vendita su richiesta
Tutte le migliori vendite

Tap M 3.0 HSS

11/78
Valutazione 



Good thread-cutting oil is as important as the tap, as it extends the useful life of the tool several times over.

28,10 €
Tasse incluse
Quantità
In vendita su richiesta

 

Política de seguridad

 

Política de envío

 

Política de devolución

Descrizione



Good thread-cutting oil is as important as the tap, as it extends the useful life of the tool several times over.

Dettagli del prodotto
11/78
Recensioni

Ancora nessuna recensione da parte degli utenti.

Scrivi la tua recensione

Tap M 3.0 HSS

Tap M 3.0 HSS



Good thread-cutting oil is as important as the tap, as it extends the useful life of the tool several times over.

Scrivi la tua recensione
16 altri prodotti della stessa categoria:
Twist drill 3.2 mm Anteprima

Riferimento: 11/88

Twist drill 3.2 mm

Recensioni: 0

When screwing together parts in the mechanics (direct linkage) Allen screws are preferable to normal screws; use M 2.5 for Futaba servos and M 3 for Graupner / JR servos. We supply all required sizes of drills and taps for the work on your model helicopter.

Prezzo 5,50 €
Più
In vendita su richiesta
Twist drill 1.5 mm Anteprima

Riferimento: 11/70

Twist drill 1.5 mm

Recensioni: 0

When screwing together parts in the mechanics (direct linkage) Allen screws are preferable to normal screws; use M 2.5 for Futaba servos and M 3 for Graupner / JR servos. We supply all required sizes of drills and taps for the work on your model helicopter.

Prezzo 5,50 €
Più
In vendita su richiesta
Tap M 2.0 HSS Anteprima

Riferimento: 11/76

Tap M 2.0 HSS

Recensioni: 0

Good thread-cutting oil is as important as the tap, as it extends the useful life of the tool several times over.

Prezzo 29,80 €
Più
In vendita su richiesta
Tap M 4.0 HSS Anteprima

Riferimento: 11/79

Tap M 4.0 HSS

Recensioni: 0

Good thread-cutting oil is as important as the tap, as it extends the useful life of the tool several times over.

Prezzo 19,90 €
Più
In vendita su richiesta
Twist drill 1.2 mm Anteprima

Riferimento: 11/96

Twist drill 1.2 mm

Recensioni: 0

We supply all required sizes of drills and taps for the work on your model helicopter.

Prezzo 5,50 €
Più
In vendita su richiesta
Twist drill 2.2 mm Anteprima

Riferimento: 11/75

Twist drill 2.2 mm

Recensioni: 0

When screwing together parts in the mechanics (direct linkage) Allen screws are preferable to normal screws; use M 2.5 for Futaba servos and M 3 for Graupner / JR servos. We supply all required sizes of drills and taps for the work on your model helicopter.

Prezzo 5,50 €
Più
In vendita su richiesta
Twist drill 2.0 mm Anteprima

Riferimento: 11/71

Twist drill 2.0 mm

Recensioni: 0

When screwing together parts in the mechanics (direct linkage) Allen screws are preferable to normal screws; use M 2.5 for Futaba servos and M 3 for Graupner / JR servos. We supply all required sizes of drills and taps for the work on your model helicopter.

Prezzo 5,50 €
Più
In vendita su richiesta
Drill set 4-part Anteprima

Riferimento: 11/69

Drill set 4-part

Recensioni: 0

Most hardware stores offer a very good range of tools like drills. However, when you need special sizes for our special helicopter application, it is very helpful to have a drill set handy which includes exactly the right diameters.  Typical applications: Drill 1.8 mm Ø for flange-head self-tapping screwsDrill 2.0 mm Ø for M 2.5 threadsDrill 2.5 mm...

Prezzo 19,90 €
Più
In vendita su richiesta
Twist drill 4.0 mm Anteprima

Riferimento: 11/89

Twist drill 4.0 mm

Recensioni: 0

We supply all required sizes of drills and taps for the work on your model helicopter.

Prezzo 5,50 €
Più
In vendita su richiesta
Twist drill 8.0 mm Anteprima

Riferimento: 11/81

Twist drill 8.0 mm

Recensioni: 0

When screwing together parts in the mechanics (direct linkage) Allen screws are preferable to normal screws; use M 2.5 for Futaba servos and M 3 for Graupner / JR servos. We supply all required sizes of drills and taps for the work on your model helicopter.

Prezzo 5,50 €
Più
In vendita su richiesta
Twist drill 5.0 mm Anteprima

Riferimento: 11/97

Twist drill 5.0 mm

Recensioni: 0

We supply all required sizes of drills and taps for the work on your model helicopter.

Prezzo 5,50 €
Più
In vendita su richiesta
Tap M 5.0 HSS Anteprima

Riferimento: 11/55

Tap M 5.0 HSS

Recensioni: 0

Good thread-cutting oil is as important as the tap, as it extends the useful life of the tool several times over.

Prezzo 19,90 €
Più
In vendita su richiesta
Twist drill 1.0 mm Anteprima

Riferimento: 11/74

Twist drill 1.0 mm

Recensioni: 0

When screwing together parts in the mechanics (direct linkage) Allen screws are preferable to normal screws; use M 2.5 for Futaba servos and M 3 for Graupner / JR servos. We supply all required sizes of drills and taps for the work on your model helicopter.

Prezzo 5,50 €
Più
In vendita su richiesta
Twist drill 2.5 mm Anteprima

Riferimento: 11/72

Twist drill 2.5 mm

Recensioni: 0

When screwing together parts in the mechanics (direct linkage) Allen screws are preferable to normal screws; use M 2.5 for Futaba servos and M 3 for Graupner / JR servos. We supply all required sizes of drills and taps for the work on your model helicopter.

Prezzo 5,50 €
Più
In vendita su richiesta
Hole-cutter, 3 to 14 mm... Anteprima

Riferimento: 11/43

Hole-cutter, 3 to 14 mm diameter, with handle

Recensioni: 0

The pointed tip and the extremely sharp, double-edged blade of this tool are particularly good for cutting holes in thin materials such as GRP and other plastics. The hole-cutter requires no centre-punching and no pilot-hole, and produces a neat hole of infinitely variable diameter within the range 3 to 14 mm. The handle doubles as protection and storage...

Prezzo 43,90 €
Più
In vendita su richiesta
Twist drill 1.8 mm Anteprima

Riferimento: 11/87

Twist drill 1.8 mm

Recensioni: 0

When screwing together parts in the mechanics (direct linkage) Allen screws are preferable to normal screws; use M 2.5 for Futaba servos and M 3 for Graupner / JR servos. We supply all required sizes of drills and taps for the work on your model helicopter.

Prezzo 5,50 €
Più
In vendita su richiesta

Seguici su Facebook

Facebook