Ninguna marca
Referencia: 92/91
Brida rodamientos autolubricantes 6 x 10 x 3 mm
Política de seguridad
Política de envío
Política de devolución
No hay reseñas de clientes en este momento.
Reference: 11/79
Good thread-cutting oil is as important as the tap, as it extends the useful life of the tool several times over.
Reference: 11/87
When screwing together parts in the mechanics (direct linkage) Allen screws are preferable to normal screws; use M 2.5 for Futaba servos and M 3 for Graupner / JR servos. We supply all required sizes of drills and taps for the work on your model helicopter.
Reference: 11/96
We supply all required sizes of drills and taps for the work on your model helicopter.
Reference: 11/89
We supply all required sizes of drills and taps for the work on your model helicopter.
Reference: 90/5
When you need a threaded hole in a workpiece, you just drill a core hole, then drive a tap into it to cut the thread. The best method of thread-cutting by hand is to use a ratchet tool holder, as this gives you the best chance of keeping the thread "straight". The ratchet can be switched to right-hand and left-hand locking, plus a rigid (no ratchet)...
Reference: 11/97
We supply all required sizes of drills and taps for the work on your model helicopter.
Reference: 11/73
When screwing together parts in the mechanics (direct linkage) Allen screws are preferable to normal screws; use M 2.5 for Futaba servos and M 3 for Graupner / JR servos. We supply all required sizes of drills and taps for the work on your model helicopter.
Reference: 11/81
When screwing together parts in the mechanics (direct linkage) Allen screws are preferable to normal screws; use M 2.5 for Futaba servos and M 3 for Graupner / JR servos. We supply all required sizes of drills and taps for the work on your model helicopter.
Reference: 11/74
When screwing together parts in the mechanics (direct linkage) Allen screws are preferable to normal screws; use M 2.5 for Futaba servos and M 3 for Graupner / JR servos. We supply all required sizes of drills and taps for the work on your model helicopter.
Reference: 11/71
When screwing together parts in the mechanics (direct linkage) Allen screws are preferable to normal screws; use M 2.5 for Futaba servos and M 3 for Graupner / JR servos. We supply all required sizes of drills and taps for the work on your model helicopter.
Reference: 11/78
Good thread-cutting oil is as important as the tap, as it extends the useful life of the tool several times over.
Reference: 11/76
Good thread-cutting oil is as important as the tap, as it extends the useful life of the tool several times over.
Reference: 11/68
We supply all required sizes of drills and taps for the work on your model helicopter.
Reference: 11/77
Good thread-cutting oil is as important as the tap, as it extends the useful life of the tool several times over.
Reference: 11/55
Good thread-cutting oil is as important as the tap, as it extends the useful life of the tool several times over.
