Referencia: 92/91
Rodamiento con orejuela de 6 x 10 x 3 mm
Brida rodamientos autolubricantes 6 x 10 x 3 mm
Ninguna marca
Referencia: 92/91
Brida rodamientos autolubricantes 6 x 10 x 3 mm
For the conversion of Xtreme mechanics to electric, for 12 S Lipos. (LiPos are not included in the set) Supplied with the drive set are: electric motor, controller, programmer, motor mount, pulley, belt, fixings Due to constantly changing supply and availability of electric motors, the motor used in this set may vary. Currently, the Pyro 700-45 from Kontronix is used. Motor set Ord.No. 3310 can be used in the following helicopters: 30 teeth pulley.
Política de seguridad
Política de envío
Política de devolución
For the conversion of Xtreme mechanics to electric, for 12 S Lipos. (LiPos are not included in the set) Supplied with the drive set are: electric motor, controller, programmer, motor mount, pulley, belt, fixings Due to constantly changing supply and availability of electric motors, the motor used in this set may vary. Currently, the Pyro 700-45 from Kontronix is used. Motor set Ord.No. 3310 can be used in the following helicopters: 30 teeth pulley.
No hay reseñas de clientes en este momento.
Reference: 3308/10
Specifications:520 RPM/Vmax. 30,000 RPM6 mm shaft10 poles38.5 mm free shaft length395 g / 13.9 oz3 kW25 mΩ Ri
Reference: 3309/12
For the conversion of Xtreme mechanics to electric, for 12 S LiPos. (LiPos are not included in the set)Supplied with the drive set are: electric motor, controller, programmer, motor mount, pulley,...
Reference: 3312/6
kit content:electric motor Kontronik Pyro 700-45 Lcontroller Kontronik JIVE 100+ LVmotor mounttoothed belt pulley 58 t. / 33 t.mounting materialKontronik TelMe can only be used with controllers Kontronik 120 JIVE Pro and higher.
Reference: 3304
Incl. motor, controller, new machined motor mount Flight time, 12S LiPo, 8 Ah, approx. 12 Minutes, depending on the model weight.For use with Vario Turbine electric mechanics 1002/76, 1002/77 and 1002/78:1002/76: BK 117, Ord.No. 7700; Hughes 500E, Ord.No. 90041002/77: Bo 105, Ord. No. 6005; Airwolf, Ord.No. 2004; Bell 430, Ord.No. 4340, Bell 230, Ord.No....
Reference: 3309
For the conversion of Xtreme mechanics to electric, for 10 S LiPos (LiPos are not included in the set).Supplied with the drive set are: electric motor, controller, programmer, motor mount, pulley,...
Reference: 3311
For the conversion of Xtreme mechanics to electric, for 10 S LiPos (LiPos are not included in the set).Supplied with the drive set are: electric motor, controller, programmer, motor mount, pulley, belt, fixingsDue to constantly changing supply and availability of electric motors, the motor used in this set may vary. Currently, the Pyro 700-52 from...
Reference: 3308/11
Specifications:400 RPM/VMax. 30,000 RPM8 mm shaft14 poles55 mm free shaft length500 g / 17.6 oz5 kW18 mΩ Ri
Reference: 3308/9
The TelMe module is the interface between a KOTRONIK ESC with module port and a Futaba receiver prepared for telemetry. TelMe is recognized automatically by the ESC and the correct data stream is started.Generally it's necessary that the transmitter uses FASSTest communication.Be sure that you update your Futaba transmitter, ProgUNIT / ProgDISC and ESC to...
Reference: 3306
Reference: 3311/1
For the conversion of Xtreme mechanics to electric, for 10 S LiPos (LiPos are not included in the set).Supplied with the drive set are: electric motor, controller, programmer, motor mount, pulley, belt, fixingsDue to constantly changing supply and availability of electric motors, the motor used in this set may vary. Currently, the Pyro 700-52 from...