Set Estabilizador aluminio

Reference: 800/4

Stabiliser set white

Instead of a horizontal fin (for mounting on the tail boom) the small inset horizontal panel replaces that. The inset fits on top of the stabiliser, outwards opposite of the tail rotor.220 mm high, excl. tail skid3-part, 45 g total weight

Reference: 800/6

Stabiliser set yellow

Instead of a horizontal fin (for mounting on the tail boom) the small inset horizontal panel replaces that. The inset fits on top of the stabiliser, outwards opposite of the tail rotor.220 mm high, excl. tail skid3-part, 45 g total weight

Reference: 860/11

Heckrohrhalter, 2fach kugelgelagert

Reference: 31/7

Inserto de soporte de pluma trasera

Reference: 870/31

Strebenanschluß-Hülse

Reference: 870/16

Leitwerkadapter, 2-teilig

Reference: 260/7

Tail boom holder

Tail boom holder XLV.

Reference: 870/105

Toothed belt, pitch T5/340

Toothed belt, pitch 5for X-Treme trainer helicoptersWhen replacing a toothed belt please note that different toothed belts are used in X-Treme mechanics and X-Treme trainer helicopters.

Reference: 860/30

CFK-Rohr 8 x 6 x 700 mm

Reference: 810/5

Kufenauflage

Reference: 870/8

Winkel für Kreisel

Reference: 260/10

Tail boom support

Tail boom support XLV.

Reference: 800/25

Stabiliser set large

If you fit a large stabiliser to your trainer there is no need for a tail skid. This stabiliser provides the tail rotor blades with enough ground clearance, and offers good flight stability at low airspeeds. There are two versions with different methods of attachment.275 mm high118 g total weightscrew fitting to tail rotor holder

Reference: 30/7

Strut set fibra de carbono 8 x 200 mm

Reference: 870/40

Edelstahl-Trägerrohre 8 mm

Reference: 800/21

Tail skid yellow

Tail skids only. Create your own individual colour scheme: e.g. white stabiliser - red skid!