Cabeza de horquilla GFK M 2.5

Reference: 059

Blade holder bolts M 4 x 26 mm G12

Pack of 3 with self-locking nuts M 4 Tip: To avoid losing those blade holder screws - push them straight back into the blade holders and fit the nuts loosely, than you know where they are next time when you assemble the model.

Reference: 054

Blade holder bolts M 3 x 20 mm G12 for tail rotor

Bolt using self-locking nuts don't need additional screw-retaining fluid. Of course this applies to the blade holder bolts on the main rotor head and on the tail rotor (as shown here). Blade holder bolts are counted among the special bolts with high tensile stength, where the shaft and thread length are matched to the application. Pack of 2 with...

Reference: 800/32

Tornillo moleteado M 4 rosca exterior

Reference: 16/6

Barniz de bloqueo rojo, 20 ml

Reference: 16/7

Barniz de bloqueo azul, 20 ml

Reference: 16/8

Barniz de bloqueo amarillo, 20 ml

Reference: 057

Blade holder bolts M 5 x 34 mm

Pack of 2 with self-locking nuts M 5Tip: To avoid losing those blade holder screws - push them straight back into the blade holders and fit the nuts loosely, than you know where they are next time when you assemble the model.

Reference: 097

Rotor head screw M 3 x 18

Pack of 1 with nut M 3

Reference: 90660

Ojal de anilla 4 mm

Reference: 92/98

Muelle de seguridad para Fenestron

Reference: 10/90

Canopy latch

The canopy retainer set helps to keep your canopies undamaged for a long period. It absorbs movement, such as abrupt shocks in hard landings, and prevents cracks developing in the canopy.Knurled nuts are used to hold the canopy in place, and they do not intent the canopy when tightened.The components of the canopy retainer system are screwed against...

Reference: 800/35

Tornillo moleteado M 3 rosca exterior

Reference: 052

Blade holder screw M 4 G12

Pack of 2 with self-locking nuts M 4Tip: To avoid losing those blade holder screws - push them straight back into the blade holders and fit the nuts loosely, than you know where they are next time when you assemble the model.

Reference: 90670

Gancho de rosca 10 mm

Reference: 107/35

Horquilla metálica M 2.5

Reference: 800/33

Tornillo moleteado M 4 rosca exterior