Ninguna marca
Referencia: 92/91
Brida rodamientos autolubricantes 6 x 10 x 3 mm
Política de seguridad
Política de envío
Política de devolución
No hay reseñas de clientes en este momento.
Reference: 78/41
Mixer lever, content of the package 1 piece.Additionial accessories for the use of mixer levers are either two flanged ballraces or two flanged bushes from Delrin as a low cost alternative. The screwing on the blade holder arm complies with the kind of hole, i.e. it depends on the through hole or on the blind hole. Please note for choosing the screws:...
Reference: 82/19
Aluminium rocker for Delta head, 5 mm ∅, alone.
Reference: 10/81
Silicone sleeve5 x 7 x 100 mmtransparent
Reference: 71 A
Centre piece for pitchcompensator, GFK, alone.
Reference: 76/16
As demands on helicopters continue to rise, so stronger blade holders are required. In this case a 14 mm blade holder is combined with a 5 mm Ø hole for blade retention, i.e. the matching blade holder screws and self-locking nuts are M5 in size.GRP blade holder with long linkage armfor two-blade rotor heads
Reference: 74/15
Pack of 4Tip: O-rings always slide with a drop of silicone oil onto the shaft.
Reference: 71/20
Pitch compensator, complete, for 10 mm ∅ main shaft, centre piece GRP
Reference: 703/45
This rotor head linkage is essential for the correct operation of the rotor head of the Alouette III due to its heavy take-off weight.
Reference: 85/1
Spacer 4 x 6 x 1.5 mm, brass Content of the package: 2 pieces
Reference: 54/18
Same design as clamp ring 54/13, but for 12 mm Ø main rotor shaft.Clamp ring for pitch compensator 12 mm Ø, length of the pin 40 mm.
Reference: 86/10
Ball collets provide the fixation of double ball-links on the flybar, in order to settle the essential distance to the rocker.Ball collet 5 mm Ø, pack of 2, chrome-plated.
