

Ninguna marca
Referencia: 34/38
Palas del rotor de cola Juego de 2 palaslongitud = 130 mmancho = 35 mm13 gsimétricopara portacuchillas con portacuchillas de 5 mm (¡no para portacuchillas Vario!), 1 orificio, Ø 3 mmcompatible con NHP
For the conversion of benzin mechanics to electric
Política de seguridad
Política de envío
Política de devolución
For the conversion of benzin mechanics to electric
No hay reseñas de clientes en este momento.
Riferimento: 3310/12
For the conversion of Xtreme mechanics to electric, for 12 S Lipos. (LiPos are not included in the set)Supplied with the drive set are: electric motor, controller, programmer, motor mount, pulley, belt, fixingsDue to constantly changing supply and availability of electric motors, the motor used in this set may vary. Currently, the Pyro 700-45 from...
Riferimento: 3309/12
Finestratura BK 117 trasparente da ritagliare
Riferimento: 834/100
So you own a Petrol Acrobatic 8304 and would like to install the mechanics in a BO 105?You will need to change the gearbox reduction ratio, and this can be accomplished with this conversion set, which also contains all the other accessory items you require.Petrol Acrobatic conversion set, for converting 8304 mechanics into 1002/40.
Riferimento: 3312/6
kit content:electric motor Kontronik Pyro 700-45 Lcontroller Kontronik JIVE 100+ LVmotor mounttoothed belt pulley 58 t. / 33 t.mounting materialKontronik TelMe can only be used with controllers Kontronik 120 JIVE Pro and higher.
Riferimento: 3308/10
Specifications:520 RPM/Vmax. 30,000 RPM6 mm shaft10 poles38.5 mm free shaft length395 g / 13.9 oz3 kW25 mΩ Ri
Riferimento: 3306
Riferimento: 3308
For the conversion of benzin mechanics to electric
Riferimento: 3311
For the conversion of Xtreme mechanics to electric, for 10 S LiPos (LiPos are not included in the set).Supplied with the drive set are: electric motor, controller, programmer, motor mount, pulley, belt, fixingsDue to constantly changing supply and availability of electric motors, the motor used in this set may vary. Currently, the Pyro 700-52 from...
Riferimento: 3308/9
The TelMe module is the interface between a KOTRONIK ESC with module port and a Futaba receiver prepared for telemetry. TelMe is recognized automatically by the ESC and the correct data stream is started.Generally it's necessary that the transmitter uses FASSTest communication.Be sure that you update your Futaba transmitter, ProgUNIT / ProgDISC and ESC to...
For the conversion of benzin mechanics to electric