Rotulas de 3.0 mm

Riferimento: 107/9

Uniball rinforzati 2,5 mm nero

Ball-links must be flexible but adequately rigid. The threaded part of the rod cuts its own thread in the ball-link, and no further fixing is necessary. Use silicone oil, Order No. 10/37, for maintenance.Pack of 10Connector fits 4.8 mm ��ballsHow do you know when the pushrod meets the end of the socket, and does it becomes screwed to far into the...

Riferimento: 060

Ball-end bolt 3.5 mm - M 2.0 x 5.0

These ball-end bolts offer an optimal connection between a GRP servo output arm and the pushrod to the mechanics. Underneath the output arm you lock the ball-end bolt with an M 2 hexagon nut. For aluminium output arms you use ball-end bolts Ord.No. 060/7 and thread-lock fluid.

Riferimento: 060/7

Uniball 3,5 mm - M2,5 x 5,0

In our range of products we provide ball-end bolts made of hard-chromed steel with an excellent surface quality, and with different ball sizes, but mainly used are those with a diameter of 4.8 mm. Please check before you order that you have selected the correct ball-end bolt. Measure the ball, the diameter and the length of the thread to be on the safe...

Riferimento: 060/4

Uniball 8,5 mm - M3,0 x 3,0

In our range of products we provide ball-end bolts made of hard-chromed steel with an excellent surface quality, and with different ball sizes, but mainly used are those with a diameter of 4.8 mm. Please check before you order that you have selected the correct ball-end bolt. Measure the ball, the diameter and the length of the thread to be on the safe...

Riferimento: 060/55

Ball-end bolt 3.5 mm - M 2.5 x 7.0

Not available

Riferimento: 107/48

Kugelgelenke für 3,0 mm Gestänge und 4,8er Kugel

Riferimento: 107/17

Ball-links 2.5 mm

Riferimento: 060/9

Uniball 8mm M3,5x3 2pz.

In our range of products we provide ball-end bolts made of hard-chromed steel with an excellent surface quality, and with different ball sizes, but mainly used are those with a diameter of 4.8 mm. Please check before you order that you have selected the correct ball-end bolt. Measure the ball, the diameter and the length of the thread to be on the safe...

Riferimento: 80/21

Rondelle bloccaggio uniball

plasticPack of 2

Riferimento: 107/37

Uniball rinforzati 2,5 mm nero

Pack of 10

Riferimento: 060/5

Uniball 20,0 mm - M3,0 x 7,0

In our range of products we provide ball-end bolts made of hard-chromed steel with an excellent surface quality, and with different ball sizes, but mainly used are those with a diameter of 4.8 mm. Please check before you order that you have selected the correct ball-end bolt. Measure the ball, the diameter and the length of the thread to be on the safe...

Riferimento: 060/24

Uniball 10,0 mm - M3,0 x 9,0

In our range of products we provide ball-end bolts made of hard-chromed steel with an excellent surface quality, and with different ball sizes, but mainly used are those with a diameter of 4.8 mm. Please check before you order that you have selected the correct ball-end bolt. Measure the ball, the diameter and the length of the thread to be on the safe...

Riferimento: 060/20

Uniball 3,0 mm. - M3,5 x 7,5

In our range of products we provide ball-end bolts made of hard-chromed steel with an excellent surface quality, and with different ball sizes, but mainly used are those with a diameter of 4.8 mm. Please check before you order that you have selected the correct ball-end bolt. Measure the ball, the diameter and the length of the thread to be on the safe...

Riferimento: 107/25

Cerniera a sfera cuscinetato

Ballraced joints respond much more readily to the slightest control movement of servos, mixer levers etc. Instead of the ball in the ball-link there is a 2 x 5 x 2.3 mm ballrace, secured with an M 2 socket-head cap screw. These ball-links are designed to fit 2.5 mm diameter pushrods. Select appropriate retaining screws according to the...

Riferimento: 107/34

Uniball M3 2pz

We can supply large ball-links for M3 pushrods separately, for installation in your own projects. The length of the link is 22 mm, and its linkage ball is designed to accept an M3 machine screw. The largest diameter of the link is 13 mm.M3 ball-linkpack of 2

Riferimento: 060/1

Uniball 9,5 mm - M2,5 x 3,0

In our range of products we provide ball-end bolts made of hard-chromed steel with an excellent surface quality, and with different ball sizes, but mainly used are those with a diameter of 4.8 mm. Please check before you order that you have selected the correct ball-end bolt. Measure the ball, the diameter and the length of the thread to be on the safe...