Riferimento: 92/91

Flanged ballrace 6 x 10 x 3 mm

Ballraces are used wherever moving parts are required to run with a minimum of play and a minimum of friction. The more ballraces are used, the more smoothly the mechanics of a helicopter works, and the lower the rate of wear. The dimensions of a ballrace mean: inside diameter (I.D.) x outside diameter (O.D.) x thickness. For flanged bearings the same...

Riferimento: 125

12 mm sliding bar

Riferimento: 90385

Tornillo prisionero M 4 x 4 flat

Riferimento: 70/76

Aste 3,0 x 75 mm

Ready-made pushrod, threaded M 3. Content of the package: 1 piece

Riferimento: 2017E

Catalogo Vario 2017

Riferimento: 20/18

Bisagras

Riferimento: 707

Rotor cap for Multi blade head

The diameter is 83 mm and the construction height from the screw-on surface to the highest point is 13 mm.It is fastened using an M4 x 14 hexagon socket screw (included).

Riferimento: 060/14

Uniball 9,5 mm - M3x3mm 2pz.

In our range of products we provide ball-end bolts made of hard-chromed steel with an excellent surface quality, and with different ball sizes, but mainly used are those with a diameter of 4.8 mm. Please check before you order that you have selected the correct ball-end bolt. Measure the ball, the diameter and the length of the thread to be on the safe...

Riferimento: 107/9

Uniball rinforzati 2,5 mm nero

Ball-links must be flexible but adequately rigid. The threaded part of the rod cuts its own thread in the ball-link, and no further fixing is necessary. Use silicone oil, Order No. 10/37, for maintenance.Pack of 10Connector fits 4.8 mm ��ballsHow do you know when the pushrod meets the end of the socket, and does it becomes screwed to far into the...

Riferimento: 34/38

Heckrotorblätter 130 mm - 5 mm Blattaufnahme

Riferimento: 107/31

Uniball rinforzati 3,0 mm nero per sfere 107/14

It is advisable to use stronger pushrods and balls with a larger diameter on demand. This combination often is selected by the pilots with airplanes as well.Ball-link for 3.0 mm pushrodpack of 25connector fits 5.5 mm ��balls

Riferimento: 67/9

Cooling fan