Basculante varilla estabilizadora alu.

Reference: 80/10

Control bridge with metal balls

The control bridge actuates the flybar. The servos pass the control commands to the swashplate. The collective pitch compensator connected to the swashplate transfers the movement to the control bridge via the angled pushrods. The flybar accepts the control commands and passes them on to the blade holders and the rotor disc.Control bridge, GRP, for 4 mm ∅...

Reference: 54/16

Clamp ring pitch compensator 17 mm

The 17 mm Ø clamp ring is fitted to the rotor head centre piece, the steel pin slides in the guide slot of the pitch compensator. Rotate the clamp for fine adjustment so that your helicopter flies straight when you apply a pitch-axis command.Clamp ring for pitch compensator 17 mm Ø, length of the pin 30 mm.

Reference: 722/71

Collective pitch compensator 12 mm

Pitch compensator, complete, for 12 mm Ø main shaft, centre piece aluminium.For use with the rotor head Ord.No. 722/72.

Reference: 702/96

Inertia weights

set of 2

Reference: 702/10

Elastomer 2-blade-centre piece

Elastomer 2-blade-centre piece, GRP.

Reference: 71/18

Spacer for pitch compensator 2.8 x 5 x 2 mm

 Content of the package2 pieces

Reference: 54/13

Clamp ring pitch compensator 10 mm

On longer rotor shafts the clamp ring for the pitch compensator sits underneath of the centre piece directly on the rotor shaft.Clamp ring for pitch compensator 10 mm Ø, length of the pin 30 mm.

Reference: 76/15

GRP blade holder reinforced

Blade holder, GRP, reinforced

Reference: 770/36

Spacer for rotor cap BK117

Not available

Reference: 705/31

5-blade centre piece, 10 mm

Item to a multi-blade rotor head for Ø 10 mm shaft; see Ord.No. 703/30, 704/30 and 705/30.

Reference: 87/12

Doble bola-link para Delta rotor

Reference: 73/10

Thrust bearing shaft 8 x 110 mm

 Thrust bearing shaft8 Ø x 110 mm

Reference: 480/54

Anillo de sujeción plateado con 3 orificios

Reference: 91/55

Lead for paddles

 Lead for paddlespack of 2approx. 8.5 g each

Reference: 832/54

Clamp ring

Clamp ring for rotor head 722/72.

Reference: 74/16

O-ring 2 x 12 mm soft

O-ring 2 x 12 mm soft Content of the package: 8 pieces Tip: O-rings always slide with a drop of silicone oil onto the shaft.