Patin para estabilizador de cola, blanco

Reference: 860/11

Heckrohrhalter, 2fach kugelgelagert

Reference: 870/30

Streben-Set, CFK

Reference: 860/10

Streben-Set, CFK

Reference: 831/6

Adapter für Vorbau Benzin-Trainer

Reference: 800/5

Stabiliser set red

Instead of a horizontal fin (for mounting on the tail boom) the small inset horizontal panel replaces that. The inset fits on top of the stabiliser, outwards opposite of the tail rotor.220 mm high, excl. tail skid3-part, 45 g total weight

Reference: 722/37

Angle bracket

Angle bracket

Reference: 809/7

Heckrohrhalter 20 mm

Reference: 31/7

Inserto de soporte de pluma trasera

Reference: 800/25

Stabiliser set large

If you fit a large stabiliser to your trainer there is no need for a tail skid. This stabiliser provides the tail rotor blades with enough ground clearance, and offers good flight stability at low airspeeds. There are two versions with different methods of attachment.275 mm high118 g total weightscrew fitting to tail rotor holder

Reference: 870/105

Toothed belt, pitch T5/340

Toothed belt, pitch 5for X-Treme trainer helicoptersWhen replacing a toothed belt please note that different toothed belts are used in X-Treme mechanics and X-Treme trainer helicopters.

Reference: 809/24

Kühlluftschacht Skyfox, rauchglas

Reference: 800/37

Canopy holder 26 mm

The required length of the canopy holder is determined by the kind of canopy and the location of its fitting points on the side frames.

Reference: 21/7

Conjunto estabilizador negro

Reference: 260/10

Tail boom support

Tail boom support XLV.

Reference: 802/50

Verbreiterungs-Set

Reference: 800/55

Stabiliser set, carbon fibre

Stabiliser set laminated of carbon2-part - extra lightweight!For installation at all trainers when the stabiliser holder Ord.No. 870/17 is present.250 mm high19.5 g total weight