Raccord articulé droit

Référence: 860/31

Strebenanschluß-Hülse

Référence: 260/11

Kit empennage XLV Trainer

GRP Stabiliser set for XLV Trainer.

Référence: 809/12

M 4 Verschraubung

Référence: 800/37

Support de verrière 26 mm

The required length of the canopy holder is determined by the kind of canopy and the location of its fitting points on the side frames.

Référence: 890/49

Lagerplatte

Référence: 860/30

CFK-Rohr 8 x 6 x 700 mm

Référence: 809/24

Kühlluftschacht Skyfox, rauchglas

Référence: 260/7

Support de poutre

Tail boom holder XLV.

Référence: 107/27

Raccord articulé coudé

 Ball-linkcurvedpack of 6

Référence: 310/8

Support de résonateur 70 mm

GRP tuned pipe holders are used to secure the tuned pipe to the tail booms. They are easy to clamp in place. The tail pipe of the tuned pipe should be covered with silicone hose (Order No. 116/8), or with one of the tail pipes (Ord.No. 116/0 or 116/9), so that the heat of the pipe does not damage the holder.Tuned pipe holder, 2-partfor 20 mm ��tail boom

Référence: 802/17

Support de tirants - 25mm

  Content of the package 1 piece

Référence: 30/7

Strut set fibra de carbono 8 x 200 mm

Référence: 802/24

Kühlluftschacht Boxer

Référence: 24/7

Conducto de aire de enfriamiento para foxy

Référence: 800/24

Kit empennage, grand

If you fit a large stabiliser to your trainer there is no need for a tail skid. This stabiliser provides the tail rotor blades with enough ground clearance, and offers good flight stability at low airspeeds. There are two versions with different methods of attachment.height 275 mm118 g total weightwith clamp for 20 mm Ø tail booms

Référence: 800/23

Collier pour empennage 800/25

Component part for stabiliser set, Ord.No. 800/25