Referencia: 92/91
Rodamiento con orejuela de 6 x 10 x 3 mm
Brida rodamientos autolubricantes 6 x 10 x 3 mm
Ninguna marca
Referencia: 92/91
Brida rodamientos autolubricantes 6 x 10 x 3 mm
Contenido del paquete: 2 Uds.
Política de seguridad
Política de envío
Política de devolución
Ersatzteil für Zusatztank Ord.No. 26/10
Packungsinhalt: 2 Stück
No hay reseñas de clientes en este momento.
Reference: 830/27
Tank 540 ml, kerosene-resistantincluding accessories complying the special request of the contact with keroseneThe CofG of a model helicopter should only be checked with an empty fuel tank.During the flight the fuel is situated in a place where the additional weight does not have an adverse effect. If you set the CofG with a full fuel tank the resultant...
Reference: 13/32
The kerosene refuelling system is sealed with a rubber nipple. The constant low pressure inside the tank draws the nipple firmly against the refuelling opening. That is also the reason why a mechanism such as a spring-controlled valve is not suitable, because the low pressure tends to push the spring back as spring tension diminishes.
Reference: 3741
Separate pump holder and hand wind pump, suitable for fitting to the 10 L fuel container.
Reference: 3721
Geared pumpfor petrol, kerosene and methanolwith accessories
Reference: 26/30
Felt clunk pick-up 16 Ø x 26 mmfor bubbles-free suck up and constant flow ofpetrol and kerosene
Reference: 26/34
Fuel tubing is required to withstand many kinds of thermal and chemical stress, i.e. it has to be resistant to petrol and kerosene whilst maintaining maximum flexibility. However, it must also be possible to fix the tubing reliably to tubes and nipples; the more valuable the model, the more important it becomes to fix the fuel tubing with absolute...
Reference: 830/24
Fuel tank nipple with bend, M5.Content of the package: 2 pieces
Reference: 26/6
Tank for kerosene, 2500 mlalternative fueltank, larger capacity