Depósito de aramida para queroseno 2,8 l

Référence: 116/5

Prise de remplissage ou de pressurisation M5

Content of the packag: 1 piececomplete as shown

Référence: 26/25

Filtre pour prise d'air du réservoir

Tank vent filter, to prevent dirt and other foreign objects from entering fuel supply.

Référence: 3720

Station de remplissage, contenu 3 l

This refuelling station for petrol helicopters consists of a petrol-proof container of 3 litres capacity, a hand-pump for filling and emptying, fittings and filler hose.

Référence: 26/60

Kevlartank para Queroseno 1.4 l

Aramid is a fibre that is used in motor racing. The tanks have an even surface inside and rough on the outside.These fuel tanks are all pressure tested to make sure that they are 100% leak-proof when they arrive at your workshop.When ordering, one tank is supplied.When mounting the lid, please fix the screws cross-wise using blue loctite until you have...

Référence: 605/26

Réservoir pour BO 105

Kerosene Tank 3.3 l, GRP, with accessories, for BO 105 with Turbine.

Référence: 26/2

Bouchon en caoutchouc

Rubber cap useful to seal fuel lines on the pit box or fuel tank nipples pack of 4

Référence: 10/67

Kraftstoff-Filter für Methanol

Référence: 791/27

Réservoir intérieur pour Cobra 2,2 l

The internal fueltank for our model of the Cobra enables the builder to produce a military version of the machine.The capacity of 2.2 l. gives flight times of around 12 - 14 minutes.

Référence: 26/100

Benzin kit incl. fuel tank 540 ccm

Not available

Référence: 10/82-100

Schlauch für Methanol 100 mOrd.No. 10/82-100

Référence: 26/32

Schlauchsicherung für Methanol

Référence: 830/68

Filtre à essence, mailles fines

Chemical analysis used in Formel 1 is able to determine 1 g of impurity within 1 ton of oil. To fulfill your demand on the cleanness of the fuel for your model helicopter you use the fine-mesh petrol filter inside the fuel tubing between the tank and the carburettor. Also suitable for kerosine turbine fuel.

Référence: 10/82-10

Schlauch für Methanol 10 mOrd.No. 10/82-10

Référence: 13/32

Systéme de remplissage pour kérosène

The kerosene refuelling system is sealed with a rubber nipple. The constant low pressure inside the tank draws the nipple firmly against the refuelling opening. That is also the reason why a mechanism such as a spring-controlled valve is not suitable, because the low pressure tends to push the spring back as spring tension diminishes.

Référence: 26/4

Tank 400 ccm Benzin/Methanol

Référence: 830/26

Réservoir 540 cm³ pour essence

Tank 540 ml, petrol-resistantincluding the requested accessories for installation in a Benzin-Trainer or in a petrol mechanics.The CofG of a model helicopter should only be checked with an empty fuel tank.During the flight the fuel is situated in a place where the additional weight does not have an adverse effect. If you set the CofG with a full fuel...