Riferimento: 70/101-2

Aste 3,0 x 100 mm

Ready-made pushrod, threaded M 3. Pack of 2

Riferimento: 79/10

Asta stabilizzatore 4 x 510 mm

The length of the flybar itself also plays an important role in the model's flight characteristics: the longer the flybar, the smoother the hover. A longer flybar increases the control deflections. 450 mm length is considered normal, while 510 mm provides more docile handling.

Riferimento: 060/12

Uniball 6,5 mm - M3,0 x 6,0

In our range of products we provide ball-end bolts made of hard-chromed steel with an excellent surface quality, and with different ball sizes, but mainly used are those with a diameter of 4.8 mm. Please check before you order that you have selected the correct ball-end bolt. Measure the ball, the diameter and the length of the thread to be on the safe...

Riferimento: 1005/52

Testa rigida per rotori da più di 2500 mm

Ord.No. 1005/52 is for a Ø 15 mm rotor shaft and Ord.No. 1005/49 for Ø 12 mm rotor shaft

Riferimento: 414/4

Set 4 pale 2100 mm

Specification 4-blade-set length: 915 mm rotor disc: 2100 mm blade root: 18 mm 1-hole blade chord: 65 mm profile thickness: 9 mm weight: ca. 420 g material: CFRP Shark Skin finish: anthracite matt symmetry: reflex l.h.r.

Riferimento: 89/1

Aste piegate 2,5 x 72 mm

On 2-blade rotor heads with flybar the angled pushrods connect the pitch compensator with the control bridge.Ready-made pushrod, threaded M 2.5, approx. 8 mm thread length each end. Pack of 2.

Riferimento: 412/4

Set 4 pale 2300 mm

Specification 4-blade-set length: 1015 mm rotor disc: 2300 mm blade root: 18 mm 1-hole blade chord: 65 mm profile thickness: 9 mm weight: ca. 480 g material: CFRP Shark Skin finish: anthracite matt symmetry: reflex l.h.r.

Riferimento: 107/25

Cerniera a sfera cuscinetato

Ballraced joints respond much more readily to the slightest control movement of servos, mixer levers etc. Instead of the ball in the ball-link there is a 2 x 5 x 2.3 mm ballrace, secured with an M 2 socket-head cap screw. These ball-links are designed to fit 2.5 mm diameter pushrods. Select appropriate retaining screws according to the...

Riferimento: 722/75

Conversione per testa rotore senza stabilizzatore

Riferimento: 70/172

Aste 3,0 x 172 mm

Ready-made pushrod, threaded M 3. Content of the package: 1 piece

Riferimento: 71/56

Corpo centrale per 12 mm, alluminio

Pitch mixer centre piece, aluminium, 12 mm Ø

Riferimento: 404/57

5-blade-set 1930 mm Scale Hughes 500

Specification 5-blade-set length: 870 mm rotor disc: 1930 mm blade root: 14 mm 1-hole drilling: ø 5 mm blade chord: 44 mm profile thickness: 7 mm weight: ca. 200 g material: CFK Shark Skin finish: anthracite matt symmetry: symmetric (l.h.r. or r.h.r. possible)