Startseite
Marken

Keine Marke

Lieferanten
Verkaufshits
Alle Verkaufshits

Pitchkompensator, 10 mm

71/30
Bewertung 
99,90 €
Bruttopreis
Menge
Verkauf auf Anfrage

 

Política de seguridad

 

Política de envío

 

Política de devolución

Beschreibung
Sistema de paso colectivo 10mm
Artikeldetails
71/30
Bewertungen

Aktuell keine Kunden-Kommentare

Eigenen Kommentar verfassen

Pitchkompensator, 10 mm

Pitchkompensator, 10 mm

Eigenen Kommentar verfassen
16 autres produits dans la même catégorie :
Chape double 90° Aperçu rapide

Référence: 87/4

Chape double 90°

Commentaire(s): 0

A 90° twisted double ball-link connect the mixer lever to the ball collet on the flybar. Content of the package: 2 pieces

Prix 11,20 €
Détails
En vente sur demande
Inertia weights for Ø 5 mm... Aperçu rapide

Référence: 79/8

Inertia weights for Ø 5 mm flybar

Commentaire(s): 0

Inertia weights are small "extra brakes". They increase the gyroscopic stability of the flybar and slow down the rotor head's response. For every beginner we recommend these so the responsiveness of the rotor head is reduced. The rotor head becomes more responsive as the inertia weights are moveded inwards (always place equally!). Inertia weights suitable...

Prix 30,60 €
Détails
En vente sur demande
Clamp ring pitch... Aperçu rapide

Référence: 54/13

Clamp ring pitch compensator 10 mm

Commentaire(s): 0

On longer rotor shafts the clamp ring for the pitch compensator sits underneath of the centre piece directly on the rotor shaft.Clamp ring for pitch compensator 10 mm Ø, length of the pin 30 mm.

Prix 27,40 €
Détails
En vente sur demande
Aluminium rocker Aperçu rapide

Référence: 82/9

Aluminium rocker

Commentaire(s): 0

When you use a speed regulator you put the magnets into the cut-outs of this clamp ring. Clamp ring for speed collection, 10 mm Ø.

Prix 22,90 €
Détails
En vente sur demande
Flybar stainless steel 4 x... Aperçu rapide

Référence: 79

Flybar stainless steel 4 x 450 mm

Commentaire(s): 0

The length of the flybar itself also plays an important role in the model's flight characteristics: the longer the flybar, the smoother the hover. A longer flybar increases the control deflections. 450 mm length is considered normal, while 510 mm provides more docile handling.

Prix 17,00 €
Détails
En vente sur demande
Rotor brake, GRP, red Aperçu rapide

Référence: 72/3

Rotor brake, GRP, red

Commentaire(s): 0

When you have landed and stopped the engine, the rotor head continues spinning for quite some time until it stops by itself. A rotor brake shortens the time you have to wait. Using light pressure with the flat of your hand on the domed face of the rotor brake you can stop the rotor in a few moments.Please note: stay in safe distance away from the turning...

Prix 11,20 €
Détails
En vente sur demande
O-ring 2 x 12 mm soft Aperçu rapide

Référence: 74/16

O-ring 2 x 12 mm soft

Commentaire(s): 0

O-ring 2 x 12 mm soft Content of the package: 8 pieces Tip: O-rings always slide with a drop of silicone oil onto the shaft.

Prix 5,50 €
Détails
En vente sur demande
Joint torique 9 x 4.5 mm Aperçu rapide

Référence: 832/74

Joint torique 9 x 4.5 mm

Commentaire(s): 0

O-ring 9 x 4.5 mm Content of the package: 4 pieces Tip: O-rings always slide with a drop of silicone oil onto the shaft.

Prix 13,50 €
Détails
En vente sur demande
Thrust bearing set complete Aperçu rapide

Référence: 117/20

Thrust bearing set complete

Commentaire(s): 0

The standard version of our mechanics includes ground thrust bearing shafts with a of 8 mm Ø and a length of 110 mm.Thrust bearings absorb the high centrifugal forces exerted by the main rotor blades. The effect of the axial bearings is retained in full when the blade holders rotate.Thrust bearing set, complete as shown.

Prix 54,60 €
Détails
En vente sur demande

Folgen Sie uns auf Facebook

Facebook