Riferimento: 332

Braccio di coda di 31 x 1300 mm, nero

 Tail boom31 x 1.0 x 1300 mmblack

Riferimento: 310/8

Supporto per tubi sintonizzato in 2 parti

GRP tuned pipe holders are used to secure the tuned pipe to the tail booms. They are easy to clamp in place. The tail pipe of the tuned pipe should be covered with silicone hose (Order No. 116/8), or with one of the tail pipes (Ord.No. 116/0 or 116/9), so that the heat of the pipe does not damage the holder.Tuned pipe holder, 2-partfor 20 mm ��tail boom

Riferimento: 7/30

Set di cinghie in fibra di carbonio 8 x 200 mm

Set, complete as illustrated.

Riferimento: 871/0

Decal sheet X-Treme 3-D

Riferimento: 143

Floats

Only experienced pilots should attempt to use floats for landings on all types of water.By no means we suggest that a beginner tries this!If floats are used as "airbags" in the beginning to avoid hard landings on the ground and to absorb the impact, this helps some pilots to succeed in overcoming their first uncertain flights.Detailsapprox.: 800 mm...

Riferimento: 12/5

Kufenstopper für 10 mm soft

Riferimento: 105/13

Tail boom 25x0,8x1260mm

 Aluminium tail boom0.8 mm wall thickness25 mm outside Øballraced for 8 mm Ø stainless steel drive shaft, 722/14

Riferimento: 7/10

Asole per sala riunioni 3 x

 Content of the package2 pieces

Riferimento: 6/12

Tapones antideslizantes 12 mm

Riferimento: 830/60

Canopy holder 58 mm

The required length of the canopy holder is determined by the kind of canopy and the location of its fitting points on the side frames.

Riferimento: 120/13

Barra di coda 25 x 1100 mm

Not available

Riferimento: 400/2

Semi scale landing gear for Bell 47 G

Scale is the goal what we focus on.On the Bell 47 G this undercarriage set impresses, even unpainted it looks like the real one.Semi scale skid landing gearpetrol version