Riferimento: 722/72

Testa rotore VR-22

The loading of every component of this rotor system is designed to take a multiple of the actual forces. We are looking here at purely safety reserves and under no cirumstances should they be used for experimental purposes.Because of the special requirements of materials used in the rotor head, we expressly recommend that only genuine VARIO spare parts...

Riferimento: 705/37

5-blade rotor head 12 mm

Not available

Riferimento: 79/15

Asta stabilizzatore 4 x 600 mm

The length of the flybar itself also plays an important role in the model's flight characteristics: the longer the flybar, the smoother the hover. A longer flybar increases the control deflections. 450 mm length is considered normal, while 510 mm provides more docile handling.

Riferimento: 832/74

OR 9,00 x 4,5 mm

O-ring 9 x 4.5 mm Content of the package: 4 pieces Tip: O-rings always slide with a drop of silicone oil onto the shaft.

Riferimento: 705/32

testa rotore per cinque pale, Ø 12 mm

Not available

Riferimento: 74/17

OR 2,5 x 13 mm. tipo morbido

O-ring 2.5 x 13 mm soft Content of the package: 8 pieces Tip: O-rings always slide with a drop of silicone oil onto the shaft.

Riferimento: 1005/47

Testa rotore per Bell 47

This rotor head was modelled as closely as possible on the original version installed on the Bell 47 G full-size helicopter. It is an excellent choice for use on the Bell 47 G III model, Ord. No. 4700.The centrifugal weights and springs are dummies, and do not work. The rotor blade swivel limits are also imitations, and have no function.The blade grips...

Riferimento: 71/30

Compensatore di passo per 10 mm

Pitch compensator, complete, for 10 mm ∅ main shaft, centre piece aluminium

Riferimento: 82/19

Bilanciere Delta, 200 mm

Aluminium rocker for Delta head, 5 mm ∅, alone.

Riferimento: 1005/12

Testa rotore per Bell 212

The basic method of operation of the turbine-powered Bell 212's rotor head is the same as that of the Bell 47 G III rotor head. The main difference is that the components have been modified to match the appearance of the Bell 212, and are therefore of different design. For example, a separate swashplate driver is not required, as it is integrated into the...

Riferimento: 705/36

Testa 5 pale, albero 12 mm

Not available

Riferimento: 1005/59

Rotorkopf für TurbineOrd.No. 1005/59