Riferimento: 1005/52

Testa rigida per rotori da più di 2500 mm

Ord.No. 1005/52 is for a Ø 15 mm rotor shaft and Ord.No. 1005/49 for Ø 12 mm rotor shaft

Riferimento: 79/10

Asta stabilizzatore 4 x 510 mm

The length of the flybar itself also plays an important role in the model's flight characteristics: the longer the flybar, the smoother the hover. A longer flybar increases the control deflections. 450 mm length is considered normal, while 510 mm provides more docile handling.

Riferimento: 060/12

Uniball 6,5 mm - M3,0 x 6,0

In our range of products we provide ball-end bolts made of hard-chromed steel with an excellent surface quality, and with different ball sizes, but mainly used are those with a diameter of 4.8 mm. Please check before you order that you have selected the correct ball-end bolt. Measure the ball, the diameter and the length of the thread to be on the safe...

Riferimento: 71/56

Corpo centrale per 12 mm, alluminio

Pitch mixer centre piece, aluminium, 12 mm Ø

Riferimento: 722/75

Conversione per testa rotore senza stabilizzatore

Riferimento: 107/25

Cerniera a sfera cuscinetato

Ballraced joints respond much more readily to the slightest control movement of servos, mixer levers etc. Instead of the ball in the ball-link there is a 2 x 5 x 2.3 mm ballrace, secured with an M 2 socket-head cap screw. These ball-links are designed to fit 2.5 mm diameter pushrods. Select appropriate retaining screws according to the...

Riferimento: 705/30

Testa rotore 5 pale, 10 mm

Corona per cinghia 8 mm 32 denti

Riferimento: 060/10

Uniball 3,5 mm - M2,5 x 3,0

In our range of products we provide ball-end bolts made of hard-chromed steel with an excellent surface quality, and with different ball sizes, but mainly used are those with a diameter of 4.8 mm. Please check before you order that you have selected the correct ball-end bolt. Measure the ball, the diameter and the length of the thread to be on the safe...

Riferimento: 060/15

Uniball 3,5 mm - M2,0 x 3,5

In our range of products we provide ball-end bolts made of hard-chromed steel with an excellent surface quality, and with different ball sizes, but mainly used are those with a diameter of 4.8 mm. Please check before you order that you have selected the correct ball-end bolt. Measure the ball, the diameter and the length of the thread to be on the safe...

Riferimento: 702/10

Corpo centrale Elastomero

Elastomer 2-blade-centre piece, GRP.

Riferimento: 705/35

Testa rotore 5 pale, 10 mm

Corona per cinghia 8 mm 40 denti

Riferimento: 722/72

Testa rotore VR-22

The loading of every component of this rotor system is designed to take a multiple of the actual forces. We are looking here at purely safety reserves and under no cirumstances should they be used for experimental purposes.Because of the special requirements of materials used in the rotor head, we expressly recommend that only genuine VARIO spare parts...