Marchi

Nessuna marca

Fornitori

Riferimento: 92/91

Flanged ballrace 6 x 10 x 3 mm

Recensioni: 0

Ballraces are used wherever moving parts are required to run with a minimum of play and a minimum of friction. The more ballraces are used, the more smoothly the mechanics of a helicopter works, and the lower the rate of wear. The dimensions of a ballrace mean: inside diameter (I.D.) x outside diameter (O.D.) x thickness. For flanged bearings the same...

Prezzo 12,80 €
Più
In vendita su richiesta
Tutte le migliori vendite

Asta stabilizzatore 5 x 600 mm

79/30
Valutazione 


The length of the flybar itself also plays an important role in the model's flight characteristics: the longer the flybar, the smoother the hover. A longer flybar increases the control deflections. 450 mm length is considered normal, while 510 mm provides more docile handling.
21,80 €
Tasse incluse
Quantità
In vendita su richiesta

 

Política de seguridad

 

Política de envío

 

Política de devolución

Descrizione


The length of the flybar itself also plays an important role in the model's flight characteristics: the longer the flybar, the smoother the hover. A longer flybar increases the control deflections. 450 mm length is considered normal, while 510 mm provides more docile handling.
Dettagli del prodotto
79/30
Recensioni

Ancora nessuna recensione da parte degli utenti.

Scrivi la tua recensione

Asta stabilizzatore 5 x 600 mm

Asta stabilizzatore 5 x 600 mm



The length of the flybar itself also plays an important role in the model's flight characteristics: the longer the flybar, the smoother the hover. A longer flybar increases the control deflections. 450 mm length is considered normal, while 510 mm provides more docile handling.
Scrivi la tua recensione
16 other products in the same category:

Reference: 74/19

O-ring 1.5 x 19 mm soft

Review(s): 0

O-ring 1.5 x 19 mm soft Content of the package: 8 pieces Tip: O-rings always slide with a drop of silicone oil onto the shaft.

Price 5.50€
More
On sale upon request

Reference: 68/19

Bearing pin

Review(s): 0

Bearing pin for swashplate driver 68/20. Content of the package: 1 piece.

Price 9.70€
More
On sale upon request

Reference: 832/47

O-ring 5 x 9 mm

Review(s): 0

O-ring 5 x 9 mm Content of the package: 2 pieces Tip: O-rings always slide with a drop of silicone oil onto the shaft.

Price 6.60€
More
On sale upon request

Reference: 1005/6

Conversion set for Delta head

Review(s): 0

In the world of full-size helicopters the Delta effect is universally acknowledged. For model helicopter rotors we have emulated the effect as closely as possible.As soon as a rotor blade is pushed out of its path by some external influence (thermal, down draught etc.) the opposite blade counters the movement and thereby subdues the rotor disc.Conversion...

Price 153.40€
More
On sale upon request

Reference: 72/3

Rotor brake, GRP, red

Review(s): 0

When you have landed and stopped the engine, the rotor head continues spinning for quite some time until it stops by itself. A rotor brake shortens the time you have to wait. Using light pressure with the flat of your hand on the domed face of the rotor brake you can stop the rotor in a few moments.Please note: stay in safe distance away from the turning...

Price 9.70€
More
On sale upon request

Reference: 54/18

Clamp ring for 12 mm

Review(s): 0

Same design as clamp ring 54/13, but for 12 mm Ø main rotor shaft.Clamp ring for pitch compensator 12 mm Ø, length of the pin 40 mm.

Price 26.60€
More
On sale upon request

Reference: 74/12

O-ring 3 x 12 mm hard

Review(s): 0

O-ring 3 x 12 mm hard Content of the package: 8 pieces Tip: O-rings always slide with a drop of silicone oil onto the shaft.

Price 5.50€
More
On sale upon request

Reference: 76/16

GRP blade holder, 5 mm ∅ hole

Review(s): 0

As demands on helicopters continue to rise, so stronger blade holders are required. In this case a 14 mm blade holder is combined with a 5 mm Ø hole for blade retention, i.e. the matching blade holder screws and self-locking nuts are M5 in size.GRP blade holder with long linkage armfor two-blade rotor heads

Price 26.60€
More
On sale upon request

Reference: 707

Rotor cap for Multi blade head

Review(s): 0

The diameter is 83 mm and the construction height from the screw-on surface to the highest point is 13 mm.It is fastened using an M4 x 14 hexagon socket screw (included).

Price 26.60€
More
On sale upon request

Seguici su Facebook