Marchi

Nessuna marca

Fornitori

Riferimento: 92/91

Flanged ballrace 6 x 10 x 3 mm

Recensioni: 0

Ballraces are used wherever moving parts are required to run with a minimum of play and a minimum of friction. The more ballraces are used, the more smoothly the mechanics of a helicopter works, and the lower the rate of wear. The dimensions of a ballrace mean: inside diameter (I.D.) x outside diameter (O.D.) x thickness. For flanged bearings the same...

Prezzo 14,70 €
Più
In vendita su richiesta
Tutte le migliori vendite

Ci sono 36 prodotti.

Visualizzati 25-36 su 36 articoli

Filtri attivi

  • Categorie: Alu-Tuning for 6 mm tail rotor
  • Categorie: Piatto Oscillante i Accessori

Riferimento: 68/50

Swashplate driver 12 mm

Recensioni: 0

 Swashplate driver, metal4 ballracesweigth approx. 25.8 gsuitable for 12 mm Ø main shafts

Prezzo 99,90 €
Più
In vendita su richiesta

Riferimento: 68/31

Swashplate 10 mm

Recensioni: 0

All swashplates (made of aluminium) are fitted with high-quality bearings and are designed for use with 2-blade, 3-blade and 4-blade rotor heads, while the outer swash-plate ring is designed for 3- and 4-point linkages.The swashplate disc can be controlled by 4 ball-end bolts at 90° or by 3 ball-end bolts at 120°, whether the linkage is direct to the...

Prezzo 108,30 €
Più
In vendita su richiesta

Riferimento: 68/21

Ball connector

Recensioni: 0

GRPfor swashplate drivers Ord.No. 68/20 and 68/50

Prezzo 11,20 €
Più
In vendita su richiesta

Riferimento: 68/20-5

Swashplate driver for rotor head 705/30

Recensioni: 0

Where a pitch compensator sits and two pushrods connect to the flybar, this is now a swashplate driver in its place.This is necessary to drive the inner ring of the swashplate in order to always control the blade angle in the same position.Aluminium swashplate driver with 4 ballraces.

Prezzo 87,20 €
Più
In vendita su richiesta

Riferimento: 68/20

Swashplate driver 10 mm

Recensioni: 0

Where a pitch compensator sits and two pushrods connect to the flybar, this is now a swashplate driver in its place.This is necessary to drive the inner ring of the swashplate in order to always control the blade angle in the same position.Aluminium swashplate driver with 4 ballraces.

Prezzo 87,20 €
Più
In vendita su richiesta

Riferimento: 68/15

Swashplate 5-blade

Recensioni: 0

The swashplate disc can be controlled by 4 ball-end bolts at 90° or by 3 ball-end bolts at 120°, whether the linkage is direct to the servos or utilises bellcranks. As standard there are 4 linkage points.In both types the swashplate bolt assumes the additional function of one linkage point. For a 120° linkage the ball-end bolts have to be replaced with...

Prezzo 131,70 €
Più
In vendita su richiesta

Riferimento: 68/14

3-D swashplate 10 mm

Recensioni: 0

This swashplate provides longer ball-end bolts on the inner ring for larger control travels, as required for 3-D flying.

Prezzo 108,30 €
Più
In vendita su richiesta

Riferimento: 52/20

Swashplate guide

Recensioni: 0

The swashplate guide prevents the outer ring of the swashplate rotating; the swashplate pin runs in the slot in this guide. The part is fixed to the dome plate using M 3 socket-head cap screws. The length of the swashplate guide slot allows generous collective pitch travels to be exploited to the full; its position on the rotor shaft can be adjusted to...

Prezzo 14,70 €
Più
In vendita su richiesta

Riferimento: 52/10

Swashplate guide black

Recensioni: 0

For Schweizer 300 (Ord.No. 6031), Hughes 500 (Ord.No. 9005) and Agusta (Ord.No. 9020). Height of the slot 47.0 mm for use with the rotor shaft 35/39.

Prezzo 14,70 €
Più
In vendita su richiesta

Seguici su Facebook