Home
Marchi

Nessuna marca

Fornitori
Migliori vendite
Flanged ballrace 6 x 10 x 3 mm Anteprima

Riferimento: 92/91

Flanged ballrace 6 x 10 x 3 mm

Recensioni: 0

Ballraces are used wherever moving parts are required to run with a minimum of play and a minimum of friction. The more ballraces are used, the more smoothly the mechanics of a helicopter works, and the lower the rate of wear. The dimensions of a ballrace mean: inside diameter (I.D.) x outside diameter (O.D.) x thickness. For flanged bearings the same...

Prezzo 14,70 €
Più
In vendita su richiesta
Aste 3,0 x 75 mm Anteprima

Riferimento: 70/76

Aste 3,0 x 75 mm

Recensioni: 0

Ready-made pushrod, threaded M 3. Content of the package: 1 piece

Prezzo 6,30 €
Più
In vendita su richiesta
Tutte le migliori vendite

Swashplate 5-blade

68/15
Valutazione 

The swashplate disc can be controlled by 4 ball-end bolts at 90° or by 3 ball-end bolts at 120°, whether the linkage is direct to the servos or utilises bellcranks. As standard there are 4 linkage points.
In both types the swashplate bolt assumes the additional function of one linkage point. For a 120° linkage the ball-end bolts have to be replaced with longer versions Ord.No. 060/4, and re-positioned.

131,70 €
Tasse incluse
Quantità
In vendita su richiesta

 

Política de seguridad

 

Política de envío

 

Política de devolución

Descrizione

The swashplate disc can be controlled by 4 ball-end bolts at 90° or by 3 ball-end bolts at 120°, whether the linkage is direct to the servos or utilises bellcranks. As standard there are 4 linkage points.
In both types the swashplate bolt assumes the additional function of one linkage point. For a 120° linkage the ball-end bolts have to be replaced with longer versions Ord.No. 060/4, and re-positioned.

Dettagli del prodotto
68/15
Recensioni

Ancora nessuna recensione da parte degli utenti.

Scrivi la tua recensione

Swashplate 5-blade

Swashplate 5-blade

The swashplate disc can be controlled by 4 ball-end bolts at 90° or by 3 ball-end bolts at 120°, whether the linkage is direct to the servos or utilises bellcranks. As standard there are 4 linkage points.
In both types the swashplate bolt assumes the additional function of one linkage point. For a 120° linkage the ball-end bolts have to be replaced with longer versions Ord.No. 060/4, and re-positioned.

Scrivi la tua recensione
16 altri prodotti della stessa categoria:
Swashplate driver for rotor... Anteprima

Riferimento: 68/20-5

Swashplate driver for rotor head 705/30

Recensioni: 0

Where a pitch compensator sits and two pushrods connect to the flybar, this is now a swashplate driver in its place.This is necessary to drive the inner ring of the swashplate in order to always control the blade angle in the same position.Aluminium swashplate driver with 4 ballraces.

Prezzo 87,20 €
Più
In vendita su richiesta
6-blade / 7-blade... Anteprima

Riferimento: 68/56

6-blade / 7-blade swashplate for 12 mm rotor shaft

Recensioni: 0

Six-blade rotor heads also call for new thinking in swashplate technology.This swashplate is designed to provide more space between the pushrods and the swashplate driver compared to rotor heads with a smaller number of blades.

Prezzo 193,20 €
Più
In vendita su richiesta
Swashplate driver 10 mm Anteprima

Riferimento: 68/20

Swashplate driver 10 mm

Recensioni: 0

Where a pitch compensator sits and two pushrods connect to the flybar, this is now a swashplate driver in its place.This is necessary to drive the inner ring of the swashplate in order to always control the blade angle in the same position.Aluminium swashplate driver with 4 ballraces.

Prezzo 87,20 €
Più
In vendita su richiesta
Ball connector Anteprima

Riferimento: 68/21

Ball connector

Recensioni: 0

GRPfor swashplate drivers Ord.No. 68/20 and 68/50

Prezzo 11,20 €
Più
In vendita su richiesta
Swashplate guide Anteprima

Riferimento: 52/20

Swashplate guide

Recensioni: 0

The swashplate guide prevents the outer ring of the swashplate rotating; the swashplate pin runs in the slot in this guide. The part is fixed to the dome plate using M 3 socket-head cap screws. The length of the swashplate guide slot allows generous collective pitch travels to be exploited to the full; its position on the rotor shaft can be adjusted to...

Prezzo 14,70 €
Più
In vendita su richiesta
3-D swashplate 10 mm Anteprima

Riferimento: 68/14

3-D swashplate 10 mm

Recensioni: 0

This swashplate provides longer ball-end bolts on the inner ring for larger control travels, as required for 3-D flying.

Prezzo 108,30 €
Più
In vendita su richiesta

Seguici su Facebook

Facebook