Home
Marchi

Nessuna marca

Fornitori
Migliori vendite
Flanged ballrace 6 x 10 x 3 mm Anteprima

Riferimento: 92/91

Flanged ballrace 6 x 10 x 3 mm

Recensioni: 0

Ballraces are used wherever moving parts are required to run with a minimum of play and a minimum of friction. The more ballraces are used, the more smoothly the mechanics of a helicopter works, and the lower the rate of wear. The dimensions of a ballrace mean: inside diameter (I.D.) x outside diameter (O.D.) x thickness. For flanged bearings the same...

Prezzo 14,70 €
Più
In vendita su richiesta
Tutte le migliori vendite

Ci sono 43 prodotti.

Ordina per:
Rilevanza Nome, da A a Z Nome, da Z ad A Prezzo, da meno caro a più caro Prezzo, da più caro a meno caro
Visualizzati 13-24 su 43 articoli

Filtri attivi

  • Categorie: Attrezzi per il montaggio
  • Categorie: Attrezzi per il set-up
  • Categorie: Chiavi esagonali
Flexible glow plug socket... Anteprima

Riferimento: 11/20

Flexible glow plug socket spanner

Recensioni: 0

Many a glow plug is buried inaccessibly inside the model. This flexible socket spanner can be curved to allow you to reach the plug, and you can keep the spanner curved while you screw the plug in or out. Fits all standard glow plugs.

Prezzo 36,50 €
Più
In vendita su richiesta
Swashplate jig Anteprima

Riferimento: 68/4

Swashplate jig

Recensioni: 0

The pushrods from the swashplate to the rotor head must be set to identical lengths.Just slip the swashplate jig under the swashplate, and the swashplate will automatically be set parallel to the dome plate and at right-angles to the rotor shaft. You can now set up all your linkages with confidence.

Prezzo 19,40 €
Più
In vendita su richiesta
Pushrod calipers Anteprima

Riferimento: 11/85

Pushrod calipers

Recensioni: 0

Model helicopter building instructions always state pushrod length as measured from ball centre to ball centre.Determining this dimension using conventional measuring tools is not really much more accurate than estimating the length.complete with measuring holders

Prezzo 43,90 €
Più
In vendita su richiesta
Allen key M 4 grub screw Anteprima

Riferimento: 11/3

Allen key M 4 grub screw

Recensioni: 0

Individual Allen key from the set Ord.No. 11/0:Allen key - for M 4 grub screw and for socket-head cap screw M 2.5

Prezzo 6,60 €
Più
In vendita su richiesta
complete socket spanner set Anteprima

Riferimento: 111/10

complete socket spanner set

Recensioni: 0

The kit contains:Ord.No. 111/11   telescope armOrd.No. 111/12   Phillips PH2Ord.No. 111/13   Phillips PH1Ord.No. 111/14   SW 3.0Ord.No. 111/15   SW 4.0Ord.No. 111/16   SW 5.0Ord.No. 111/17   SW 6.0

Prezzo 99,90 €
Più
In vendita su richiesta
Flybar spirit level Anteprima

Riferimento: 79/1

Flybar spirit level

Recensioni: 0

To adjust the pitch of the main rotor blades accurately it is essential to set the flybar exactly horizontal. This is done by simply hanging a spirit level from the flybar. But make sure that the helicopter is standing on a level surface before you start!

Prezzo 17,00 €
Più
In vendita su richiesta
Allen key set Anteprima

Riferimento: 111/20

Allen key set

Recensioni: 0

the kit contains:Ord.No. 11/47 SW 1,5Ord.No. 11/48 SW 2,0Ord.No. 11/49 SW 2,5Ord.No. 11/50 SW 3,0Ord.No. 11/54 SW 4,0

Prezzo 75,60 €
Più
In vendita su richiesta
Rotor head immobiliser Anteprima

Riferimento: 79/3

Rotor head immobiliser

Recensioni: 0

Working on the pitch adjustment of the main rotor blades requires a few conditions. First of all your helicopter must be standing on a flat level surface; the flybar must be horizontal and remain so throughout the procedure. The smooth running of all components with bearings makes this an almost impossible task because the slightest movement during pitch...

Prezzo 19,40 €
Più
In vendita su richiesta
Rotor blade allen key for... Anteprima

Riferimento: 33/11

Rotor blade allen key for M5 socket-head screws

Recensioni: 0

Rotor blades for large-scale model helicopters must be secured using screws of the appropriate size. Normally M4 bolts are employed, but here the usual size is M5. The T-handle of this M5 allen key provides plenty of torque, but you should only tighten the screws to the point where the blades can still align themselves at start-up.

Prezzo 11,70 €
Più
In vendita su richiesta
Flybar jig Anteprima

Riferimento: 91/1

Flybar jig

Recensioni: 0

A flybar rotor head is controlled indirectly; movements are transmitted first to the flybar and paddles (Hiller control method, using auxiliary rotor head). The Hiller system only works perfectly if the paddles are set exactly parallel to each other. Unevenly set paddles also produce a bending moment on the flybar during every rotation which leads to more...

Prezzo 27,40 €
Più
In vendita su richiesta
Torna all'inizio

Seguici su Facebook

Facebook