Struttura inferiore per MD 520 N

Riferimento: 107/13

Balls chrome-plated 2.5 x 4.8 mm

Chrome-plated brass balls are used to screw onto bell cranks or servo arms for connection to the ball-links of pushrods. The chromium plating prevents premature wear of the ball links.Content of the package: 25 pieces

Riferimento: 266/31

Blue anodized hub gear

Not available

Riferimento: 54/14

Clamp ring 12 mm for rotor shaft

The clamp ring below the dome plate secures the rotor shaft inside the mechanics. Pay attention to achieve a safe installation, because the complete model is hanging on this clamp ring! Clamp ring for rotor shaft 12 mm Ø

Riferimento: 1006/15

Scatola ingranaggi principale in alluminio

This is what we recommend to ensure a transfer of power of today’s electric motors with their torque:a new aluminium main gear box Ord.No. 1006/15 steel internal tooth gear with matching clutch bell Ord.No. 36/48.

Riferimento: 132/37

Montaggio dell'albero di trasmissione del rotore di coda, parte I

These parts are used in a petrol Fenestron mechanical system for mounting the gearbox, where the rotational speed of the tail drive shaft has to be increased.Pack of 2

Riferimento: 500/362

Freewheel clockwise

Not available

Riferimento: 54/9

Clamp ring 10 mm diameter rotor shaft

Below the dome plate you install the clamp ring with the socket on top if no thrust bearing is mounted. The socket supports the clamp ring against the inner ring of the ballrace - otherwise the clamp ring would grind on the outer ring, and affect the function of the ballrace.Clamp ring for rotor shaft, 10 mm diameter

Riferimento: 107/12

Balls chrome-plated 2.0 x 4.8 mm

Chrome-plated brass balls are used to screw onto bell cranks or servo arms for connection to the ball-links of pushrods. The chromium plating prevents premature wear of the ball links.Content of the package: 25 pieces

Riferimento: 57/2

Bush 3.1 x 10 x 4 mm

Pack of 2

Riferimento: 105/49

Giunto per tampone Ø10

Ø10 x 2,5 mmContent of the package: 2 pieces

Riferimento: 607/53

Set plato ciclico BO 105 T-Rex

Riferimento: 49/53

Bush 5 x 8 x 5 mm

Not available

Riferimento: 830/51

Brackets for petrol mechanics

Fuselage mounting brackets for petrol mechanics, pack of 2,recommended accessories for the installation of a petrol trainer mechanics in a fuselage.

Riferimento: 605/66

Cespuglio 3,1 x 10 x 23,5 mm

plasticPack of 2

Riferimento: 53/19

Dome fittings set for PHT3-L

Dome fittings set for JetCat PHT3-L turbine

Riferimento: 260/50

Side frame XLV

Side frame XLV. The two side frames are identical in size an shape. Content of the package: 1 piece.