Soporte delantero para Benzim Trainner

Reference: 834/41

Toothed belt, XL/190

Toothed belt for BENZIN Acrobatic.

Reference: 870/7

Heckrohrhalter, Alu

Reference: 260/5

Boom clamp

Boom clamp for stabilizer, turbine version XLV.

Reference: 800/36

Rubber plug 14mm, cone 5x6mm.

Rubber plug 14 mmCone 5 x 6 mmContent of the package 6 pieces

Reference: 800/20

Tail skid red

Tail skids only. Create your own individual colour scheme: e.g. white stabiliser - red skid!

Reference: 800/37

Canopy holder 26 mm

The required length of the canopy holder is determined by the kind of canopy and the location of its fitting points on the side frames.

Reference: 722/37

Angle bracket

Angle bracket

Reference: 831/6

Adapter für Vorbau Benzin-Trainer

Reference: 118/62

Photo and video landing gear

It's a simple matter to clip the still / video camera landing gear underneath any model helicopter, and you're ready to start taking still or video pictures from the air. You will need a little...

Reference: 260/17

Centre bearing set

 Centre bearing setincluding 2 O-ringsexcluding ballrace

Reference: 800/52

Stabiliser set

 Aluminium Stabiliser set largefor trainer models like BENZIN Acrobatic

Reference: 802/50

Verbreiterungs-Set

Reference: 860/30

CFK-Rohr 8 x 6 x 700 mm

Reference: 800/25

Stabiliser set large

If you fit a large stabiliser to your trainer there is no need for a tail skid. This stabiliser provides the tail rotor blades with enough ground clearance, and offers good flight stability at low airspeeds. There are two versions with different methods of attachment.275 mm high118 g total weightscrew fitting to tail rotor holder

Reference: 260/38

Strut for motor

Strut for motor, XLV.

Reference: 860/120

Toothed belt for X-Perience, 3M/606

Toothed belt for X-Perience. Content of the package: 1 piece.