Accueil
Marques

No brand

Fournisseurs
Meilleures Ventes
Flanged ballrace 6 x 10 x 3 mm Aperçu rapide

Référence: 92/91

Flanged ballrace 6 x 10 x 3 mm

Commentaire(s): 0

Ballraces are used wherever moving parts are required to run with a minimum of play and a minimum of friction. The more ballraces are used, the more smoothly the mechanics of a helicopter works, and the lower the rate of wear. The dimensions of a ballrace mean: inside diameter (I.D.) x outside diameter (O.D.) x thickness. For flanged bearings the same...

Prix 14,70 €
Détails
En vente sur demande
Toutes les meilleures ventes

Il y a 420 produits.

Trier par :
Pertinence Nom, A à Z Nom, Z à A Prix, croissant Prix, décroissant
Affichage 49-60 de 420 article(s)

Filtres actifs

Réservoir 540 cm³ pour... Aperçu rapide

Référence: 830/27

Réservoir 540 cm³ pour kérosène

Commentaire(s): 0

Tank 540 ml, kerosene-resistantincluding accessories complying the special request of the contact with keroseneThe CofG of a model helicopter should only be checked with an empty fuel tank.During the flight the fuel is situated in a place where the additional weight does not have an adverse effect. If you set the CofG with a full fuel tank the resultant...

Prix 37,50 €
Détails
En vente sur demande
Silencer system BK 117,... Aperçu rapide

Référence: 116/52

Silencer system BK 117, Dauphin

Commentaire(s): 0

Exhaust header and gasket with 42 mm hole spacing We will exchange those components for engines with 34 - 35 mm hole spacing - please advise specifically when ordering.

Prix 269,70 €
Détails
En vente sur demande
Clutch lining 48 x 45 x... Aperçu rapide

Référence: 830/8

Clutch lining 48 x 45 x 16.5 mm

Commentaire(s): 0

Friction between the flywheel and the clutch bell result in a certain amount of wear of the clutch lining. For installation you slightly grind one of the outer edges. Afterwards you press the liner with that edge in front into the clutch bell. To glue in a new clutch liner you use e.g. UHU plus endfest 300, Ord.No. 10/26 or 10/27.

Prix 34,30 €
Détails
En vente sur demande
pinion gear 22-tooth Aperçu rapide

Référence: 64/20

pinion gear 22-tooth

Commentaire(s): 0

Clutch pinion gear incl. flywheel and split taper collet 22-tooth module 1 material: GRP twin ballraced incl. clutch lining fits the glow plug motor

Prix 75,80 €
Détails
En vente sur demande
Retour en haut

Suivez-nous sur Facebook

Facebook