Accueil

Filtrer par

Disponibilité

Disponibilité

Prix

Prix

  • 5,00 € - 100,00 €

Catégories

Catégories

Marques

No brand

Fournisseurs
Meilleures Ventes
Flanged ballrace 6 x 10 x 3 mm Aperçu rapide

Référence: 92/91

Flanged ballrace 6 x 10 x 3 mm

Commentaire(s): 0

Ballraces are used wherever moving parts are required to run with a minimum of play and a minimum of friction. The more ballraces are used, the more smoothly the mechanics of a helicopter works, and the lower the rate of wear. The dimensions of a ballrace mean: inside diameter (I.D.) x outside diameter (O.D.) x thickness. For flanged bearings the same...

Prix 14,70 €
Détails
En vente sur demande
Toutes les meilleures ventes

Il y a 67 produits.

Trier par :
Pertinence Nom, A à Z Nom, Z à A Prix, croissant Prix, décroissant
Affichage 13-24 de 67 article(s)

Filtres actifs

  • Catégories : Accessoires spécifiques
  • Catégories : Kits
  • Catégories : Mêches
Drill set 4-part Aperçu rapide

Référence: 11/69

Drill set 4-part

Commentaire(s): 0

Most hardware stores offer a very good range of tools like drills. However, when you need special sizes for our special helicopter application, it is very helpful to have a drill set handy which includes exactly the right diameters.  Typical applications: Drill 1.8 mm Ø for flange-head self-tapping screwsDrill 2.0 mm Ø for M 2.5 threadsDrill 2.5 mm...

Prix 19,90 €
Détails
En vente sur demande
Tool case set Aperçu rapide

Référence: 11/35

Tool case set

Commentaire(s): 0

We strongly recommend that when you begin assembling your first helicopter you use the correct combination of tools right from the start. This tool case includes Allen keys for grubscrews from M 3 to M 5, a straight-point screwdriver, a cross-point screwdriver, M 3 and M 4 box spanners and thread-lock fluid. The ball-link driver fits into the small box...

Prix 94,20 €
Détails
En vente sur demande
Pushrod calipers Aperçu rapide

Référence: 11/85

Pushrod calipers

Commentaire(s): 0

Model helicopter building instructions always state pushrod length as measured from ball centre to ball centre.Determining this dimension using conventional measuring tools is not really much more accurate than estimating the length.complete with measuring holders

Prix 43,90 €
Détails
En vente sur demande
Twist drill 1.5 mm Aperçu rapide

Référence: 11/70

Twist drill 1.5 mm

Commentaire(s): 0

When screwing together parts in the mechanics (direct linkage) Allen screws are preferable to normal screws; use M 2.5 for Futaba servos and M 3 for Graupner / JR servos. We supply all required sizes of drills and taps for the work on your model helicopter.

Prix 5,50 €
Détails
En vente sur demande
Glazing panel shears straight Aperçu rapide

Référence: 11/260

Glazing panel shears straight

Commentaire(s): 0

These powerful, sharp shears simplify the task of cutting out vacuum-moulded bodywork components. Glazing panels, dummy fuel tanks etc. are easily cut out along the moulded-in lines using these special shears. We suggest not to cut out anything until you satisfy yourself with the exact dimensions. This is because GRP parts (fuselages etc.) are hand made...

Prix 32,30 €
Détails
En vente sur demande
Twist drill 2.0 mm Aperçu rapide

Référence: 11/71

Twist drill 2.0 mm

Commentaire(s): 0

When screwing together parts in the mechanics (direct linkage) Allen screws are preferable to normal screws; use M 2.5 for Futaba servos and M 3 for Graupner / JR servos. We supply all required sizes of drills and taps for the work on your model helicopter.

Prix 5,50 €
Détails
En vente sur demande
Glasspaper file, flat Aperçu rapide

Référence: 11/28

Glasspaper file, flat

Commentaire(s): 0

If you enjoy building full-fuselage models you cannot help but appreciate practical tools which make your work easier. The glasspaper file is ideal for final trimming of openings for windows, doors and vent grilles after machining them out. The file is 25 cm long overall, with a sanding area 13 cm long and 2.5 cm wide on each side. The file is supplied...

Prix 14,80 €
Détails
En vente sur demande
complete socket spanner set Aperçu rapide

Référence: 111/10

complete socket spanner set

Commentaire(s): 0

The kit contains:Ord.No. 111/11   telescope armOrd.No. 111/12   Phillips PH2Ord.No. 111/13   Phillips PH1Ord.No. 111/14   SW 3.0Ord.No. 111/15   SW 4.0Ord.No. 111/16   SW 5.0Ord.No. 111/17   SW 6.0

Prix 99,90 €
Détails
En vente sur demande
Widia disc cutter Aperçu rapide

Référence: 29/11

Widia disc cutter

Commentaire(s): 0

Widia produced a tungsten carbide, derived from "like diamond - Wie Diamant (Ger)". The first Widia tools were available on the open market in 1923. They consisted at that time of approx. 94 % tungsten carbide and 6 % cobalt. Today's types contain additives that improve the hardness etc. The Widia disc cutter is ideal for cutting clean-edged openings in...

Prix 16,90 €
Détails
En vente sur demande
Twist drill 2.5 mm Aperçu rapide

Référence: 11/72

Twist drill 2.5 mm

Commentaire(s): 0

When screwing together parts in the mechanics (direct linkage) Allen screws are preferable to normal screws; use M 2.5 for Futaba servos and M 3 for Graupner / JR servos. We supply all required sizes of drills and taps for the work on your model helicopter.

Prix 5,50 €
Détails
En vente sur demande
Allen key set Aperçu rapide

Référence: 111/20

Allen key set

Commentaire(s): 0

the kit contains:Ord.No. 11/47 SW 1,5Ord.No. 11/48 SW 2,0Ord.No. 11/49 SW 2,5Ord.No. 11/50 SW 3,0Ord.No. 11/54 SW 4,0

Prix 75,60 €
Détails
En vente sur demande
Twist drill 2.8 mm Aperçu rapide

Référence: 11/73

Twist drill 2.8 mm

Commentaire(s): 0

When screwing together parts in the mechanics (direct linkage) Allen screws are preferable to normal screws; use M 2.5 for Futaba servos and M 3 for Graupner / JR servos. We supply all required sizes of drills and taps for the work on your model helicopter.

Prix 5,50 €
Détails
En vente sur demande
Retour en haut

Suivez-nous sur Facebook

Facebook