Marques

No brand

Référence: 34/30

Tail rotor blades 130 mm

Commentaire(s): 0

Tail rotor bladesSpecification 8.0 mm blade root8.7 g approx.29 mm blade chord5.0 mm profile thicknesssymmetrical130 mm longbalanced1 pair

Prix 65,70 €
Détails
En vente sur demande

Référence: 10/90

Canopy latch

Commentaire(s): 0

The canopy retainer set helps to keep your canopies undamaged for a long period. It absorbs movement, such as abrupt shocks in hard landings, and prevents cracks developing in the canopy.Knurled nuts are used to hold the canopy in place, and they do not intent the canopy when tightened.The components of the canopy retainer system are screwed against...

Prix 7,30 €
Détails
En vente sur demande
Toutes les meilleures ventes

Tap M 4.0 HSS

11/79
Note 



Good thread-cutting oil is as important as the tap, as it extends the useful life of the tool several times over.

19,90 €
Quantité
En vente sur demande

 

Política de seguridad

 

Política de envío

 

Política de devolución

Description



Good thread-cutting oil is as important as the tap, as it extends the useful life of the tool several times over.

Détails du produit
11/79
Avis

Aucun avis n'a été publié pour le moment.

Donnez votre avis

Tap M 4.0 HSS

Tap M 4.0 HSS



Good thread-cutting oil is as important as the tap, as it extends the useful life of the tool several times over.

Donnez votre avis
16 other products in the same category:

Reference: 11/43

Hole-cutter, 3 to 14 mm diameter, with handle

Review(s): 0

The pointed tip and the extremely sharp, double-edged blade of this tool are particularly good for cutting holes in thin materials such as GRP and other plastics. The hole-cutter requires no centre-punching and no pilot-hole, and produces a neat hole of infinitely variable diameter within the range 3 to 14 mm. The handle doubles as protection and storage...

Price 43.90€
More
On sale upon request

Reference: 11/71

Twist drill 2.0 mm

Review(s): 0

When screwing together parts in the mechanics (direct linkage) Allen screws are preferable to normal screws; use M 2.5 for Futaba servos and M 3 for Graupner / JR servos. We supply all required sizes of drills and taps for the work on your model helicopter.

Price 5.50€
More
On sale upon request

Reference: 11/73

Twist drill 2.8 mm

Review(s): 0

When screwing together parts in the mechanics (direct linkage) Allen screws are preferable to normal screws; use M 2.5 for Futaba servos and M 3 for Graupner / JR servos. We supply all required sizes of drills and taps for the work on your model helicopter.

Price 5.50€
More
On sale upon request

Reference: 11/72

Twist drill 2.5 mm

Review(s): 0

When screwing together parts in the mechanics (direct linkage) Allen screws are preferable to normal screws; use M 2.5 for Futaba servos and M 3 for Graupner / JR servos. We supply all required sizes of drills and taps for the work on your model helicopter.

Price 5.50€
More
On sale upon request

Reference: 11/87

Twist drill 1.8 mm

Review(s): 0

When screwing together parts in the mechanics (direct linkage) Allen screws are preferable to normal screws; use M 2.5 for Futaba servos and M 3 for Graupner / JR servos. We supply all required sizes of drills and taps for the work on your model helicopter.

Price 5.50€
More
On sale upon request

Reference: 11/81

Twist drill 8.0 mm

Review(s): 0

When screwing together parts in the mechanics (direct linkage) Allen screws are preferable to normal screws; use M 2.5 for Futaba servos and M 3 for Graupner / JR servos. We supply all required sizes of drills and taps for the work on your model helicopter.

Price 5.50€
More
On sale upon request

Reference: 11/97

Twist drill 5.0 mm

Review(s): 0

We supply all required sizes of drills and taps for the work on your model helicopter.

Price 5.50€
More
On sale upon request

Reference: 90/5

Ratchet tool holder

Review(s): 0

When you need a threaded hole in a workpiece, you just drill a core hole, then drive a tap into it to cut the thread. The best method of thread-cutting by hand is to use a ratchet tool holder, as this gives you the best chance of keeping the thread "straight". The ratchet can be switched to right-hand and left-hand locking, plus a rigid (no ratchet)...

Price 32.90€
More
On sale upon request

Reference: 11/89

Twist drill 4.0 mm

Review(s): 0

We supply all required sizes of drills and taps for the work on your model helicopter.

Price 5.50€
More
On sale upon request

Reference: 11/77

Tap M 2.5 HSS

Review(s): 0

Good thread-cutting oil is as important as the tap, as it extends the useful life of the tool several times over.

Price 29.80€
More
On sale upon request

Reference: 11/88

Twist drill 3.2 mm

Review(s): 0

When screwing together parts in the mechanics (direct linkage) Allen screws are preferable to normal screws; use M 2.5 for Futaba servos and M 3 for Graupner / JR servos. We supply all required sizes of drills and taps for the work on your model helicopter.

Price 5.50€
More
On sale upon request

Reference: 11/75

Twist drill 2.2 mm

Review(s): 0

When screwing together parts in the mechanics (direct linkage) Allen screws are preferable to normal screws; use M 2.5 for Futaba servos and M 3 for Graupner / JR servos. We supply all required sizes of drills and taps for the work on your model helicopter.

Price 5.50€
More
On sale upon request

Reference: 11/78

Tap M 3.0 HSS

Review(s): 0

Good thread-cutting oil is as important as the tap, as it extends the useful life of the tool several times over.

Price 28.10€
More
On sale upon request

Reference: 11/70

Twist drill 1.5 mm

Review(s): 0

When screwing together parts in the mechanics (direct linkage) Allen screws are preferable to normal screws; use M 2.5 for Futaba servos and M 3 for Graupner / JR servos. We supply all required sizes of drills and taps for the work on your model helicopter.

Price 5.50€
More
On sale upon request

Reference: 11/55

Tap M 5.0 HSS

Review(s): 0

Good thread-cutting oil is as important as the tap, as it extends the useful life of the tool several times over.

Price 19.90€
More
On sale upon request