

No brand
Référence: 2017 E
Référence: 97/4
When you build your first model helicopter you will find all the linkage components required to connect the servos to the mechanics supplied with the RC set (German radio systems only). When you come to installing servos in other models you can use this servo linkage set which contains all the link balls, screws, nuts and screw-fitting pushrod...
The TelMe module is the interface between a KOTRONIK ESC with module port and a Futaba receiver prepared for telemetry. TelMe is recognized automatically by the ESC and the correct data stream is started.
Generally it's necessary that the transmitter uses FASSTest communication.
Be sure that you update your Futaba transmitter, ProgUNIT / ProgDISC and ESC to the newest software.
Usable transmitters:
Política de seguridad
Política de envío
Política de devolución
The TelMe module is the interface between a KOTRONIK ESC with module port and a Futaba receiver prepared for telemetry. TelMe is recognized automatically by the ESC and the correct data stream is started.
Generally it's necessary that the transmitter uses FASSTest communication.
Be sure that you update your Futaba transmitter, ProgUNIT / ProgDISC and ESC to the newest software.
Usable transmitters:
Aucun avis n'a été publié pour le moment.
Riferimento: 3310
For the conversion of Xtreme mechanics to electric, for 10 S LiPos (LiPos are not included in the set). Supplied with the drive set are: electric motor, controller, programmer, motor mount, pulley, belt, fixings Due to constantly changing supply and availability of electric motors, the motor used in this set may vary. Currently, the Pyro 700-52 from...
Riferimento: 3303/0
Not available
Riferimento: 3307
For the conversion of benzin mechanics to electric
Riferimento: 3308
For the conversion of benzin mechanics to electric
Riferimento: 3312/6
kit content:electric motor Kontronik Pyro 700-45 Lcontroller Kontronik JIVE 100+ LVmotor mounttoothed belt pulley 58 t. / 33 t.mounting materialKontronik TelMe can only be used with controllers Kontronik 120 JIVE Pro and higher.
Riferimento: 3308/15
Finestratura superiore per UH-1D verde da ritagliare
The TelMe module is the interface between a KOTRONIK ESC with module port and a Futaba receiver prepared for telemetry. TelMe is recognized automatically by the ESC and the correct data stream is started.
Generally it's necessary that the transmitter uses FASSTest communication.
Be sure that you update your Futaba transmitter, ProgUNIT / ProgDISC and ESC to the newest software.
Usable transmitters: