Tube AC 20 x 0,8 x 780 mm, argent

Référence: 302/1

Tail boom 20 x 900 mm

Not available

Référence: 907/2

Servo mount

Use this special servo mount for installing the throttle servo on the base plate.

Référence: 17/16

Stainless steel tube 6.0 x 0.3 x 950 mm

Advanced pilots appreciate the more precise control response of a rigid tail rotor drive system, as provided by a stainless steel drive shaft. Stainless steel tube 6.0 x 0.3 x 950 mm

Référence: 321

Tube AC 25 x 0,8 x 910 mm, noir

 Tail boom25 x 0.8 x 910 mmblack

Référence: 315

Tube AC 25 x 0,8 x 720 mm, noir

 Tail boom25 x 0.8 x 720 mmblack

Référence: 301

Tube AC 20 x 0,8 x 900 mm, titane

 Tail boom20 x 0.8 x 900 mmtitanium

Référence: 840/13

Poutre AC 20 x 0,8 x 780 mm noir, avec roulements

 Aluminium tail boom0.8 mm wall thickness20 mm outside Øballraced for 6 mm Ø stainless steel drive shaft, 17/16

Référence: 310

Tube AC 20 x 0,8 x 810 mm, titane

 Tail boom20 x 0.8 x 810 mmtitanium

Référence: 800/12

Steuerdrahtführung, 3-teilig

Référence: 313

Tube AC 20 x 0,5 x 790 mm, noir

 Tail boom20 x 0.5 x 790 mmblackweight 59 gTail booms with a wall thickness of 0.5 mm are specially tested for the use in models with electric drive only and must not be used for models powered by combustion engines! The wall thickness is just 0.5 mm for the reduction of weight. Comparative, the weight of a tail boom with 0.8 x 20 x 790 mm is 109 g.

Référence: 834/70

Support de poutre, 25 mm

A 2-part GRP tail boom holder keeps a firm hold on the 25 mm ��tail boom. The tail boom holder is screwed between the side frames with socket-head cap screws M 3 x 55 (Ord.No. 90135).

Référence: 17/68

Mittenlagerungs-Set 25 mm

Référence: 311

Tube AC 25 x 0,8 x 820 mm, noir

 Tail boom25 x 0.8 x 820 mmblack

Référence: 21/3

Steuerstange 2 x 250 mm, Eisen verzinkt

Référence: 17/19

Mittenlagerungs-Set 20 mm - 3 Stück

Référence: 809/70

Heckrohrhalter 25 mm